{"title":"Power Systems","description":"","products":[{"product_id":"central-box-100-8-channel-pdu","title":"Central Box 100 8-Channel PDU","description":"\u003ch2\u003eJeti USA Central Box 100 Power Distribution Unit\u003c\/h2\u003e\n\u003ch3\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/jeti-centralbox200.pdf?v=1778185680\" target=\"_blank\" rel=\"noopener\"\u003eDownload the Instruction Manual Here\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/jeti-centralbox200-menu.pdf?v=1778185676\" target=\"_blank\" rel=\"noopener\"\u003eDownload the Menu Diagram Here\u003c\/a\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThe Central Box 100 is a switchboard designed for the complete management of servos in a model with an emphasis on safety. The Central Box has a unique design that provides overload protection at each servo output. The Central Box can manage up to eight servos and fully supports the Jeti EX telemetry system. Up to two receivers with serial (PPM, EX Bus) output can be connected at the same time to the Central Box for complete RF signal redundancy.\u003c\/p\u003e\n\u003cp\u003eWith Jeti Duplex 2.4GHz DC\/DS transmitters, the full potential of the Central Box can be used, such as an easy way to wirelessly configure the Servo Outputs, EX Telemetry, Fail-Safe Setting or Fast Servo Response.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eControl Management with Configurable Servo Output\u003c\/li\u003e\n\u003cli\u003ePower Distribution with Overload Protection\u003c\/li\u003e\n\u003cli\u003eFirmware Updatable via Jeti USB Adapter\u003c\/li\u003e\n\u003cli\u003eJeti Duplex EX Bus or PPM Compatible\u003c\/li\u003e\n\u003cli\u003eWirelessly Programmable Using DC\/DS Tx Device Explorer\u003c\/li\u003e\n\u003cli\u003eIndependent Receiver Signal Inputs (Rx 1, Rx 2)\u003c\/li\u003e\n\u003cli\u003eUp to 8x Servo Outputs with Overload Protection\u003c\/li\u003e\n\u003cli\u003eUp to 3x Telemetry Sensors Inputs\u003c\/li\u003e\n\u003cli\u003eOutput Current: 10A Continues\/90A Peak\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Jeti","offers":[{"title":"Default Title","offer_id":46722679374013,"sku":"JETI-BOX100","price":145.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/JETI-BOX100-central-power-distribution-unit-magnetic-switch.jpg?v=1778186514"},{"product_id":"central-box-210-15-channel-pdu-with-magnetic-switch","title":"Central Box 210 15-Channel PDU with Magnetic Switch","description":"\u003ch2\u003eJeti USA Central Box 210 Power Distribution Unit with Magnetic Switch\u003c\/h2\u003e\n\u003ch3\u003e\n\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/jeti-centralbox200.pdf?v=1778185680\" target=\"_blank\"\u003eDownload the Instruction Manual Here\u003c\/a\u003e\u003cbr\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/jeti-centralbox200-menu.pdf?v=1778185676\" target=\"_blank\"\u003eDownload the Menu Diagram Here\u003c\/a\u003e\n\u003c\/h3\u003e\n\u003ch3\u003eIncludes: (1) Jeti Central Box, (1) Magnetic Switch, (1) Magnetic Key\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eControl Management with Configurable Servo Output\u003c\/li\u003e\n\u003cli\u003ePower Distribution with Two Independent Inputs\u003c\/li\u003e\n\u003cli\u003eHeavy Duty Aluminum Case for Extra Cooling and Protection\u003c\/li\u003e\n\u003cli\u003eFirmware Updatable via Jeti USB Adapter and Jeti Studio\u003c\/li\u003e\n\u003cli\u003eWirelessly Programmable Using DC\/DS Tx Device Explorer\u003c\/li\u003e\n\u003cli\u003eIndependent Receiver Signal Inputs (R1, R2, E1\/R3)\u003c\/li\u003e\n\u003cli\u003eUp to 15x Standard PWM and Ditex Telemetry Servo Outputs\u003c\/li\u003e\n\u003cli\u003eUp to 3x Telemetry Sensors Inputs (E1\/R3, E2\/15, E3\/14)\u003c\/li\u003e\n\u003cli\u003eInput for Included Magnetic or Optional Wireless Switch\u003c\/li\u003e\n\u003cli\u003eInput Voltage: 4V\u003c\/li\u003e\n\u003cli\u003e8.4V\u003c\/li\u003e\n\u003cli\u003eOutput Current: 2x 20A Continues\/90A Peak\u003c\/li\u003e\n\u003cli\u003eDimensions\/Weight: 65mm x 42mm x 18mm\/59g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Central Box 210 is an improvement over the venerable Central Box 200. We have removed the overload protection at each servo output and designed an aluminum housing for those high power demand applications. The Central Box 210 features true Battery Redundancy, Ditex Servo Telemetry, Jeti EX Telemetry, and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) with serial (PPM, EX Bus) output for complete Power \u0026amp; RF Signal Redundancy.\u003c\/p\u003e\n\u003cp\u003eWith Jeti Duplex 2.4GHz DC\/DS transmitters, the full potential of the Central Box can be used, such as easy way to wirelessly configure the Servo Outputs, Ditex Servo \u0026amp; EX Telemetry, Fail-Safe Setting or Function Assignment.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePower Supply\u003c\/b\u003e\u003cbr\u003eThe power batteries are connected to the Central Box using MPX connectors. The Central Box allows two batteries to be connected. During use, the power is actually supplied from the battery with the higher voltage. If the voltage is the same, the power can be used from both batteries at the same time. When the voltage of the batteries is different, the power is not shared and each pack is isolated from the other. This allows you to use batteries of different capacity, number of cells and chemistry type. If the power for the Central Box is provided only from one battery, it can be connected via battery (BATT 1) Input.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMagnetic Switch\u003c\/b\u003e\u003cbr\u003eThe magnetic switch is used to turn the Central Box ON\/OFF and is connected to a separate slot labeled \"SW\". To turn on the Central Box using the magnetic switch it is necessary to hold the supplied magnet (key) to the target so that the key and the target on the magnetic switch are properly oriented.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWireless Switch R3\/RSW\u003c\/b\u003e\u003cbr\u003eState-of-the-art device that sets Jeti as a leading designer and manufacturer of radio control systems. Wireless power switch is fully integrated into the 2.4GHz radio system. For first time your receiver can be turned ON\/OFF with simple flipping of the switch wirelessly from the Jeti DC\/DS transmitters.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFail-Safe Setting\u003c\/b\u003e\u003cbr\u003eSwitches ON\/OFF of the Fail-Safe function. If the Fail-Safe function is deactivated, there is no signal generated in any Central Box outputs at the signal loss. If you activate the Fail Safe function, you can also select how the Central Box responds at signal loss for each of the individual outputs.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eServo Mapping\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eServo No. - Assigning outputs of the transmitter to the Central Box outputs.\u003c\/li\u003e\n\u003cli\u003eGroup - Assigning specific output to the group of output impulses that will be generated from the receiver in the same time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eDitex Servo Telemetry\u003c\/b\u003e\u003cbr\u003eThe Ditex telemetry servos offer groundbreaking design features combined with incredible reliability. Advanced radio control telemetry systems such as Jeti Duplex are capable of providing real-time information including complete telemetry data (Torque, Min\/Max Current, Voltage, Angle, Telemetry Alarms) and full system integration.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDuplex Telemetry\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature - Temperature of the Central Box\u003c\/li\u003e\n\u003cli\u003eVoltage - Voltage (V) of Individual Outputs of the Central Box\u003c\/li\u003e\n\u003cli\u003eCurrent - Current (A) Drawn from the Battery\u003c\/li\u003e\n\u003cli\u003eCapacity - Capacity (mAh) Taken from the Batteries\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Jeti","offers":[{"title":"Default Title","offer_id":46722679406781,"sku":"JETI-BOX210","price":269.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/JETI-BOX210-central-box-power-distribution-unit-magnetic-switch.jpg?v=1777484693"},{"product_id":"central-box-210-15-channel-pdu-with-3-r3-rsw-receivers","title":"Central Box 210 15-Channel PDU with (3) R3\/RSW Receivers","description":"\u003ch2\u003eJeti USA Central Box 210 Power Distribution Unit with (3) R3\/RSW Receivers\u003c\/h2\u003e\n\u003ch3\u003e\n\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/jeti-centralbox200.pdf?v=1778185680\" target=\"_blank\"\u003eDownload the Instruction Manual Here\u003c\/a\u003e\u003cbr\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/jeti-centralbox200-menu.pdf?v=1778185676\" target=\"_blank\"\u003eDownload the Menu Diagram Here\u003c\/a\u003e\n\u003c\/h3\u003e\n\u003ch3\u003eIncludes: (1) Jeti Central Box, (3) Duplex EX R3\/RSW 2.4GHz Receiver\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eControl Management with Configurable Servo Output\u003c\/li\u003e\n\u003cli\u003ePower Distribution with Two Independent Inputs\u003c\/li\u003e\n\u003cli\u003eHeavy Duty Aluminum Case for Extra Cooling and Protection\u003c\/li\u003e\n\u003cli\u003eFirmware Updatable via Jeti USB Adapter and Jeti Studio\u003c\/li\u003e\n\u003cli\u003eWirelessly Programmable Using DC\/DS Tx Device Explorer\u003c\/li\u003e\n\u003cli\u003eIndependent Receiver Signal Inputs (R1, R2, E1\/R3)\u003c\/li\u003e\n\u003cli\u003eUp to 15x Standard PWM and Ditex Telemetry Servo Outputs\u003c\/li\u003e\n\u003cli\u003eUp to 3x Telemetry Sensors Inputs (E1\/R3, E2\/15, E3\/14)\u003c\/li\u003e\n\u003cli\u003eInput for Included Magnetic or Optional Wireless Switch\u003c\/li\u003e\n\u003cli\u003eInput Voltage: 4V\u003c\/li\u003e\n\u003cli\u003e8.4V\u003c\/li\u003e\n\u003cli\u003eOutput Current: 2x 20A Continues\/90A Peak\u003c\/li\u003e\n\u003cli\u003eDimensions\/Weight: 65mm x 42mm x 18mm\/59g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Central Box 210 is an improvement over the venerable Central Box 200. We have removed the overload protection at each servo output and designed an aluminum housing for those high power demand applications. The Central Box 210 features true Battery Redundancy, Ditex Servo Telemetry, Jeti EX Telemetry, and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) with serial (PPM, EX Bus) output for complete Power \u0026amp; RF Signal Redundancy.\u003c\/p\u003e\n\u003cp\u003eWith Jeti Duplex 2.4GHz DC\/DS transmitters, the full potential of the Central Box can be used, such as easy way to wirelessly configure the Servo Outputs, Ditex Servo \u0026amp; EX Telemetry, Fail-Safe Setting or Function Assignment.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePower Supply\u003c\/b\u003e\u003cbr\u003eThe power batteries are connected to the Central Box using MPX connectors. The Central Box allows two batteries to be connected. During use, the power is actually supplied from the battery with the higher voltage. If the voltage is the same, the power can be used from both batteries at the same time. When the voltage of the batteries is different, the power is not shared and each pack is isolated from the other. This allows you to use batteries of different capacity, number of cells and chemistry type. If the power for the Central Box is provided only from one battery, it can be connected via battery (BATT 1) Input.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMagnetic Switch\u003c\/b\u003e\u003cbr\u003eThe magnetic switch is used to turn the Central Box ON\/OFF and is connected to a separate slot labeled \"SW\". To turn on the Central Box using the magnetic switch it is necessary to hold the supplied magnet (key) to the target so that the key and the target on the magnetic switch are properly oriented.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWireless Switch R3\/RSW\u003c\/b\u003e\u003cbr\u003eState-of-the-art device that sets Jeti as a leading designer and manufacturer of radio control systems. Wireless power switch is fully integrated into the 2.4GHz radio system. For first time your receiver can be turned ON\/OFF with simple flipping of the switch wirelessly from the Jeti DC\/DS transmitters.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFail-Safe Setting\u003c\/b\u003e\u003cbr\u003eSwitches ON\/OFF of the Fail-Safe function. If the Fail-Safe function is deactivated, there is no signal generated in any Central Box outputs at the signal loss. If you activate the Fail Safe function, you can also select how the Central Box responds at signal loss for each of the individual outputs.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eServo Mapping\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eServo No. - Assigning outputs of the transmitter to the Central Box outputs.\u003c\/li\u003e\n\u003cli\u003eGroup - Assigning specific output to the group of output impulses that will be generated from the receiver in the same time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eDitex Servo Telemetry\u003c\/b\u003e\u003cbr\u003eThe Ditex telemetry servos offer groundbreaking design features combined with incredible reliability. Advanced radio control telemetry systems such as Jeti Duplex are capable of providing real-time information including complete telemetry data (Torque, Min\/Max Current, Voltage, Angle, Telemetry Alarms) and full system integration.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDuplex Telemetry\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature - Temperature of the Central Box\u003c\/li\u003e\n\u003cli\u003eVoltage - Voltage (V) of Individual Outputs of the Central Box\u003c\/li\u003e\n\u003cli\u003eCurrent - Current (A) Drawn from the Battery\u003c\/li\u003e\n\u003cli\u003eCapacity - Capacity (mAh) Taken from the Batteries\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Jeti","offers":[{"title":"Default Title","offer_id":46722679472317,"sku":"JETI-BOX210R3-3","price":410.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/JETI-BOX210-central-box-power-distribution-unit-magnetic-switch.jpg?v=1777484693"},{"product_id":"central-box-220-15-channel-pdu-with-magnetic-switch","title":"Central Box 220 15-Channel PDU with Magnetic Switch","description":"\u003ch2\u003eJeti USA Central Box 220 Power Distribution Unit with Magnetic Switch\u003c\/h2\u003e\n\u003ch3\u003e\n\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/jeti-centralbox200.pdf?v=1778185680\" target=\"_blank\"\u003eDownload the Instruction Manual Here\u003c\/a\u003e\u003cbr\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/jeti-centralbox200-menu.pdf?v=1778185676\" target=\"_blank\"\u003eDownload the Menu Diagram Here\u003c\/a\u003e\n\u003c\/h3\u003e\n\u003ch3\u003eIncludes: (1) Jeti Central Box, (1) Magnetic Switch, (1) Magnetic Key\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eControl Management with Configurable Servo Output\u003c\/li\u003e\n\u003cli\u003ePower Distribution with Two Independent Inputs\u003c\/li\u003e\n\u003cli\u003eHeavy Duty Aluminum Case for Extra Cooling and Protection\u003c\/li\u003e\n\u003cli\u003eFirmware Updatable via Jeti USB Adapter and Jeti Studio\u003c\/li\u003e\n\u003cli\u003eWirelessly Programmable Using DC\/DS Tx Device Explorer\u003c\/li\u003e\n\u003cli\u003eIndependent Receiver Signal Inputs (R1, R2, E1\/R3)\u003c\/li\u003e\n\u003cli\u003eUp to 15x Standard PWM and Ditex Telemetry Servo Outputs\u003c\/li\u003e\n\u003cli\u003eUp to 3x Telemetry Sensors Inputs (E1\/R3, E2\/15, E3\/14)\u003c\/li\u003e\n\u003cli\u003eInput for Included Magnetic or Optional Wireless Switch\u003c\/li\u003e\n\u003cli\u003eInput Voltage: 4V\u003c\/li\u003e\n\u003cli\u003e8.4V\u003c\/li\u003e\n\u003cli\u003eOutput Current: 2x 20A Continues\/90A Peak\u003c\/li\u003e\n\u003cli\u003eDimensions\/Weight: 65mm x 42mm x 18mm\/59g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Central Box 220 is a switchboard designed for the complete management of servos in a model with an emphasis on safety. The Central Box 220 has a unique design that provides overload protection for up to 11 Standard (up to 415 oz\/in, 30 kg\/cm) and 4 Ultra Torque (up to 830 oz\/in, 60 kg\/cm) servos. The Central Box 220 features true Battery Redundancy, Ditex Servo Telemetry, Jeti EX Telemetry, and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) with serial (PPM, EX Bus) output for complete Power \u0026amp; RF Signal Redundancy.\u003c\/p\u003e\n\u003cp\u003eWith Jeti Duplex 2.4GHz DC\/DS transmitters, the full potential of the Central Box can be used, such as easy way to wirelessly configure the Servo Outputs, Ditex Servo \u0026amp; EX Telemetry, Fail-Safe Setting or Function Assignment.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePower Supply\u003c\/b\u003e\u003cbr\u003eThe power batteries are connected to the Central Box using MPX connectors. The Central Box allows two batteries to be connected. During use, the power is actually supplied from the battery with the higher voltage. If the voltage is the same, the power can be used from both batteries at the same time. When the voltage of the batteries is different, the power is not shared and each pack is isolated from the other. This allows you to use batteries of different capacity, number of cells and chemistry type. If the power for the Central Box is provided only from one battery, it can be connected via battery (BATT 1) Input.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMagnetic Switch\u003c\/b\u003e\u003cbr\u003eThe magnetic switch is used to turn the Central Box ON\/OFF and is connected to a separate slot labeled \"SW\". To turn on the Central Box using the magnetic switch it is necessary to hold the supplied magnet (key) to the target so that the key and the target on the magnetic switch are properly oriented.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWireless Switch R3\/RSW\u003c\/b\u003e\u003cbr\u003eState-of-the-art device that sets Jeti as a leading designer and manufacturer of radio control systems. Wireless power switch is fully integrated into the 2.4GHz radio system. For first time your receiver can be turned ON\/OFF with simple flipping of the switch wirelessly from the Jeti DC\/DS transmitters.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFail-Safe Setting\u003c\/b\u003e\u003cbr\u003eSwitches ON\/OFF of the Fail-Safe function. If the Fail-Safe function is deactivated, there is no signal generated in any Central Box outputs at the signal loss. If you activate the Fail Safe function, you can also select how the Central Box responds at signal loss for each of the individual outputs.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eServo Mapping\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eServo No. - Assigning outputs of the transmitter to the Central Box outputs.\u003c\/li\u003e\n\u003cli\u003eGroup - Assigning specific output to the group of output impulses that will be generated from the receiver in the same time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eDitex Servo Telemetry\u003c\/b\u003e\u003cbr\u003eThe Ditex telemetry servos offer groundbreaking design features combined with incredible reliability. Advanced radio control telemetry systems such as Jeti Duplex are capable of providing real-time information including complete telemetry data (Torque, Min\/Max Current, Voltage, Angle, Telemetry Alarms) and full system integration.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDuplex Telemetry\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature - Temperature of the Central Box\u003c\/li\u003e\n\u003cli\u003eVoltage - Voltage (V) of Individual Outputs of the Central Box\u003c\/li\u003e\n\u003cli\u003eCurrent - Current (A) Drawn from the Battery\u003c\/li\u003e\n\u003cli\u003eCapacity - Capacity (mAh) Taken from the Batteries\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Jeti","offers":[{"title":"Default Title","offer_id":46722679505085,"sku":"JETI-BOX220","price":295.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/JETI-BOX220-central-box-power-distribution-unit-magnetic-switch.jpg?v=1777484694"},{"product_id":"central-box-220-15-channel-pdu-with-3-r3-rsw-receivers","title":"Central Box 220 15-Channel PDU with (3) R3\/RSW Receivers","description":"\u003ch2\u003eJeti USA Central Box 220 Power Distribution Unit with (3) R3\/RSW Receivers\u003c\/h2\u003e\n\u003ch3\u003e\n\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/jeti-centralbox200.pdf?v=1778185680\" target=\"_blank\"\u003eDownload the Instruction Manual Here\u003c\/a\u003e\u003cbr\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/jeti-centralbox200-menu.pdf?v=1778185676\" target=\"_blank\"\u003eDownload the Menu Diagram Here\u003c\/a\u003e\n\u003c\/h3\u003e\n\u003ch3\u003eIncludes: (1) Jeti Central Box, (3) Duplex EX R3\/RSW 2.4GHz Receiver\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eControl Management with Configurable Servo Output\u003c\/li\u003e\n\u003cli\u003ePower Distribution with Two Independent Inputs\u003c\/li\u003e\n\u003cli\u003eHeavy Duty Aluminum Case for Extra Cooling and Protection\u003c\/li\u003e\n\u003cli\u003eFirmware Updatable via Jeti USB Adapter and Jeti Studio\u003c\/li\u003e\n\u003cli\u003eWirelessly Programmable Using DC\/DS Tx Device Explorer\u003c\/li\u003e\n\u003cli\u003eIndependent Receiver Signal Inputs (R1, R2, E1\/R3)\u003c\/li\u003e\n\u003cli\u003eUp to 15x Standard PWM and Ditex Telemetry Servo Outputs\u003c\/li\u003e\n\u003cli\u003eUp to 3x Telemetry Sensors Inputs (E1\/R3, E2\/15, E3\/14)\u003c\/li\u003e\n\u003cli\u003eInput for Included Magnetic or Optional Wireless Switch\u003c\/li\u003e\n\u003cli\u003eInput Voltage: 4V\u003c\/li\u003e\n\u003cli\u003e8.4V\u003c\/li\u003e\n\u003cli\u003eOutput Current: 2x 20A Continues\/90A Peak\u003c\/li\u003e\n\u003cli\u003eDimensions\/Weight: 65mm x 42mm x 18mm\/59g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Central Box 220 is a switchboard designed for the complete management of servos in a model with an emphasis on safety. The Central Box 220 has a unique design that provides overload protection for up to 11 Standard (up to 415 oz\/in, 30 kg\/cm) and 4 Ultra Torque (up to 830 oz\/in, 60 kg\/cm) servos. The Central Box 220 features true Battery Redundancy, Ditex Servo Telemetry, Jeti EX Telemetry, and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) with serial (PPM, EX Bus) output for complete Power \u0026amp; RF Signal Redundancy.\u003c\/p\u003e\n\u003cp\u003eWith Jeti Duplex 2.4GHz DC\/DS transmitters, the full potential of the Central Box can be used, such as easy way to wirelessly configure the Servo Outputs, Ditex Servo \u0026amp; EX Telemetry, Fail-Safe Setting or Function Assignment.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePower Supply\u003c\/b\u003e\u003cbr\u003eThe power batteries are connected to the Central Box using MPX connectors. The Central Box allows two batteries to be connected. During use, the power is actually supplied from the battery with the higher voltage. If the voltage is the same, the power can be used from both batteries at the same time. When the voltage of the batteries is different, the power is not shared and each pack is isolated from the other. This allows you to use batteries of different capacity, number of cells and chemistry type. If the power for the Central Box is provided only from one battery, it can be connected via battery (BATT 1) Input.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMagnetic Switch\u003c\/b\u003e\u003cbr\u003eThe magnetic switch is used to turn the Central Box ON\/OFF and is connected to a separate slot labeled \"SW\". To turn on the Central Box using the magnetic switch it is necessary to hold the supplied magnet (key) to the target so that the key and the target on the magnetic switch are properly oriented.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWireless Switch R3\/RSW\u003c\/b\u003e\u003cbr\u003eState-of-the-art device that sets Jeti as a leading designer and manufacturer of radio control systems. Wireless power switch is fully integrated into the 2.4GHz radio system. For first time your receiver can be turned ON\/OFF with simple flipping of the switch wirelessly from the Jeti DC\/DS transmitters.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFail-Safe Setting\u003c\/b\u003e\u003cbr\u003eSwitches ON\/OFF of the Fail-Safe function. If the Fail-Safe function is deactivated, there is no signal generated in any Central Box outputs at the signal loss. If you activate the Fail Safe function, you can also select how the Central Box responds at signal loss for each of the individual outputs.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eServo Mapping\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eServo No. - Assigning outputs of the transmitter to the Central Box outputs.\u003c\/li\u003e\n\u003cli\u003eGroup - Assigning specific output to the group of output impulses that will be generated from the receiver in the same time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eDitex Servo Telemetry\u003c\/b\u003e\u003cbr\u003eThe Ditex telemetry servos offer groundbreaking design features combined with incredible reliability. Advanced radio control telemetry systems such as Jeti Duplex are capable of providing real-time information including complete telemetry data (Torque, Min\/Max Current, Voltage, Angle, Telemetry Alarms) and full system integration.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDuplex Telemetry\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature - Temperature of the Central Box\u003c\/li\u003e\n\u003cli\u003eVoltage - Voltage (V) of Individual Outputs of the Central Box\u003c\/li\u003e\n\u003cli\u003eCurrent - Current (A) Drawn from the Battery\u003c\/li\u003e\n\u003cli\u003eCapacity - Capacity (mAh) Taken from the Batteries\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Jeti","offers":[{"title":"Default Title","offer_id":46722679537853,"sku":"JETI-BOX220R3-3","price":395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/JETI-BOX220-central-box-power-distribution-unit-magnetic-switch.jpg?v=1777484694"},{"product_id":"central-box-310-18-channel-pdu-with-magnetic-switch","title":"Central Box 310 18-Channel PDU with Magnetic Switch","description":"\u003ch2\u003eJeti USA Central Box 310 Power Distribution Unit with Magnetic Switch\u003c\/h2\u003e\r\n\u003cul\u003e\n\u003cli\u003eControl Management with Configurable Servo Output\r\n\u003c\/li\u003e\n\u003cli\u003ePower Distribution with Two Independent Inputs\r\n\u003c\/li\u003e\n\u003cli\u003eHeavy Duty Aluminum Case for Extra Cooling and Protection\r\n\u003c\/li\u003e\n\u003cli\u003eFirmware Updatable via Jeti USB Adapter and Jeti Studio\r\n\u003c\/li\u003e\n\u003cli\u003eWirelessly Programmable Using DC\/DS Tx Device Explorer\r\n\u003c\/li\u003e\n\u003cli\u003eIndependent Receiver Signal Inputs (R1, R2, E1\/R3)\r\n\u003c\/li\u003e\n\u003cli\u003eUp to (18) Standard PWM and Ditex Telemetry Servo Outputs\r\n\u003c\/li\u003e\n\u003cli\u003eUp to (4) four Telemetry Sensors Inputs (E1\/R3, E2, E3, E4)\r\n\u003c\/li\u003e\n\u003cli\u003eInput for Included Magnetic or Optional Wireless Switch\r\n\u003c\/li\u003e\n\u003cli\u003eInput\/Output Voltage: 4V - 14V\/5V - 8.4V (0.1V Steps)\r\n\u003c\/li\u003e\n\u003cli\u003eOutput Current: 20A Continues\/80A Peak\r\n\u003c\/li\u003e\n\u003cli\u003eDimensions\/Weight: 107mm x 66mm x 21mm\/135g\u003c\/li\u003e\n\u003c\/ul\u003e\r\n\u003cp\u003eThe Jeti Central Box 310 is fully programmable switchboard with two (2) independent, stabilized power inputs with single voltage regulator (20A Continues\/80A Peak) designed for complete power and signal management of servos with great emphasis on safety. The Jeti Central Box 310 and is designed with an aluminum housing for those high power demand applications. Specially designed for models utilizing very large servos with high current draws, the overload feature of the Jeti Central Box 320 has been removed. The Jeti Central Box 310 features true Battery Redundancy, Ditex Servo Telemetry, Jeti EX Telemetry, and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) with serial (PPM, EX Bus) output for complete Power \u0026amp; RF Signal Redundancy. In addition the Central Box 310 has up to four (4) independent E1\/E4 telemetry inputs. The onboard BEC allows the output voltage for the servo to be adjusted from 5V to 8.4V in 0.1V steps using Jeti Transmitter Device Explorer interface.\u003c\/p\u003e\r\n\u003cp\u003eWith Jeti Duplex 2.4GHz DC\/DS transmitters, the full potential of the Central Box can be used, such as easy way to wirelessly configure the Servo Outputs, Ditex Servo \u0026amp; EX Telemetry, Fail-Safe Setting or Function Assignment.\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003ePower Supply\u003c\/b\u003e\u003cbr\u003eThe power batteries are connected to the Central Box using MPX connectors. The Central Box allows two batteries to be connected. During use, the power is actually supplied from the battery with the higher voltage. If the voltage is the same, the power can be used from both batteries at the same time. When the voltage of the batteries is different, the power is not shared and each pack is isolated from the other. This allows you to use batteries of different capacity, number of cells and chemistry type. If the power for the Central Box is provided only from one battery, it can be connected via battery (BATT 1) Input.\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eMagnetic Switch (Included)\u003c\/b\u003e\u003cbr\u003eThe magnetic switch is used to turn the Central Box ON\/OFF and is connected to a separate slot labeled \"SW\". To turn on the Central Box using the magnetic switch it is necessary to hold the supplied magnet (key) to the target so that the key and the target on the magnetic switch are properly oriented.\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eWireless Switch R3\/RSW (Optional)\u003c\/b\u003e\u003cbr\u003eState-of-the-art device that sets Jeti as a leading designer and manufacturer of radio control systems. Wireless power switch is fully integrated into the 2.4GHz radio system. For first time your receiver can be turned ON\/OFF with simple flipping of the switch wirelessly from the Jeti DC\/DS transmitters.\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eFail-Safe Setting\u003c\/b\u003e\u003cbr\u003e\r\nSwitches ON\/OFF of the Fail-Safe function. If the Fail-Safe function is deactivated, there is no signal generated in any Central Box outputs at the signal loss. If you activate the Fail Safe function, you can also select how the Central Box responds at signal loss for each of the individual outputs.\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eServo Mapping\u003c\/b\u003e\u003c\/p\u003e\r\n\u003cul\u003e\n\u003cli\u003eServo No. - Assigning outputs of the transmitter to the Central Box outputs.\r\n\u003c\/li\u003e\n\u003cli\u003eGroup - Assigning specific output to the group of output impulses that will be generated from the receiver in the same time.\u003c\/li\u003e\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cb\u003eDitex Servo Telemetry\u003c\/b\u003e\u003cbr\u003eThe Ditex telemetry servos offer groundbreaking design features combined with incredible reliability. Advanced radio control telemetry systems such as Jeti Duplex are capable of providing real-time information including complete telemetry data (Torque, Min\/Max Current, Voltage, Angle, Telemetry Alarms) and full system integration.\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eDuplex Telemetry\u003c\/b\u003e\u003c\/p\u003e\r\n\u003cul\u003e\n\u003cli\u003eTemperature - Temperature of the Central Box\r\n\u003c\/li\u003e\n\u003cli\u003eVoltage In - Voltage of Individual Outputs of the Central Box\r\n\u003c\/li\u003e\n\u003cli\u003eCurrent - Current Drawn from the Battery\r\n\u003c\/li\u003e\n\u003cli\u003eCapacity - Capacity Taken from the Batteries\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Jeti","offers":[{"title":"Default Title","offer_id":46722679570621,"sku":"JETI-BOX310","price":395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/JETI-BOX310-central-box-power-distribution-unit-magnetic-switch.jpg?v=1777484696"},{"product_id":"central-box-310-18-channel-pdu-power-distribution-combo-with-r3-rsw-receivers-3","title":"Central Box 310 18-Channel PDU Power Distribution Combo with R3\/RSW Receivers (3)","description":"\u003ch2\u003eJeti USA Central Box 310 18-Channel PDU Power Distribution Combo with R3\/RSW Receivers (3)\u003c\/h2\u003e\r\n\u003cul\u003e\n\u003cli\u003eControl Management with Configurable Servo Output\r\n\u003c\/li\u003e\n\u003cli\u003ePower Distribution with Two Independent Inputs\r\n\u003c\/li\u003e\n\u003cli\u003eHeavy Duty Aluminum Case for Extra Cooling and Protection\r\n\u003c\/li\u003e\n\u003cli\u003eFirmware Updatable via Jeti USB Adapter and Jeti Studio\r\n\u003c\/li\u003e\n\u003cli\u003eWirelessly Programmable Using DC\/DS Tx Device Explorer\r\n\u003c\/li\u003e\n\u003cli\u003eIndependent Receiver Signal Inputs (R1, R2, E1\/R3)\r\n\u003c\/li\u003e\n\u003cli\u003eUp to (18) Standard PWM and Ditex Telemetry Servo Outputs\r\n\u003c\/li\u003e\n\u003cli\u003eUp to (4) four Telemetry Sensors Inputs (E1\/R3, E2, E3, E4)\r\n\u003c\/li\u003e\n\u003cli\u003eInput\/Output Voltage: 4V - 14V\/5V - 8.4V (0.1V Steps)\r\n\u003c\/li\u003e\n\u003cli\u003eOutput Current: 20A Continues\/80A Peak\r\n\u003c\/li\u003e\n\u003cli\u003eDimensions\/Weight: 107mm x 66mm x 21mm\/135g\u003c\/li\u003e\n\u003c\/ul\u003e\r\n\u003cp\u003eThe Jeti Central Box 310 is fully programmable switchboard with two (2) independent, stabilized power inputs with single voltage regulator (20A Continues\/80A Peak) designed for complete power and signal management of servos with great emphasis on safety. The Jeti Central Box 310 and is designed with an aluminum housing for those high power demand applications. Specially designed for models utilizing very large servos with high current draws, the overload feature of the Jeti Central Box 320 has been removed. The Jeti Central Box 310 features true Battery Redundancy, Ditex Servo Telemetry, Jeti EX Telemetry, and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) with serial (PPM, EX Bus) output for complete Power \u0026amp; RF Signal Redundancy. In addition the Central Box 310 has up to four (4) independent E1\/E4 telemetry inputs. The onboard BEC allows the output voltage for the servo to be adjusted from 5V to 8.4V in 0.1V steps using Jeti Transmitter Device Explorer interface.\u003c\/p\u003e\r\n\u003cp\u003eWith Jeti Duplex 2.4GHz DC\/DS transmitters, the full potential of the Central Box can be used, such as easy way to wirelessly configure the Servo Outputs, Ditex Servo \u0026amp; EX Telemetry, Fail-Safe Setting or Function Assignment.\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003ePower Supply\u003c\/b\u003e\u003cbr\u003eThe power batteries are connected to the Central Box using MPX connectors. The Central Box allows two batteries to be connected. During use, the power is actually supplied from the battery with the higher voltage. If the voltage is the same, the power can be used from both batteries at the same time. When the voltage of the batteries is different, the power is not shared and each pack is isolated from the other. This allows you to use batteries of different capacity, number of cells and chemistry type. If the power for the Central Box is provided only from one battery, it can be connected via battery (BATT 1) Input.\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eMagnetic Switch (Included)\u003c\/b\u003e\u003cbr\u003eThe magnetic switch is used to turn the Central Box ON\/OFF and is connected to a separate slot labeled \"SW\". To turn on the Central Box using the magnetic switch it is necessary to hold the supplied magnet (key) to the target so that the key and the target on the magnetic switch are properly oriented.\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eWireless Switch R3\/RSW (Optional)\u003c\/b\u003e\u003cbr\u003eState-of-the-art device that sets Jeti as a leading designer and manufacturer of radio control systems. Wireless power switch is fully integrated into the 2.4GHz radio system. For first time your receiver can be turned ON\/OFF with simple flipping of the switch wirelessly from the Jeti DC\/DS transmitters.\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eFail-Safe Setting\u003c\/b\u003e\u003cbr\u003e\r\nSwitches ON\/OFF of the Fail-Safe function. If the Fail-Safe function is deactivated, there is no signal generated in any Central Box outputs at the signal loss. If you activate the Fail Safe function, you can also select how the Central Box responds at signal loss for each of the individual outputs.\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eServo Mapping\u003c\/b\u003e\u003c\/p\u003e\r\n\u003cul\u003e\n\u003cli\u003eServo No. - Assigning outputs of the transmitter to the Central Box outputs.\r\n\u003c\/li\u003e\n\u003cli\u003eGroup - Assigning specific output to the group of output impulses that will be generated from the receiver in the same time.\u003c\/li\u003e\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cb\u003eDitex Servo Telemetry\u003c\/b\u003e\u003cbr\u003eThe Ditex telemetry servos offer groundbreaking design features combined with incredible reliability. Advanced radio control telemetry systems such as Jeti Duplex are capable of providing real-time information including complete telemetry data (Torque, Min\/Max Current, Voltage, Angle, Telemetry Alarms) and full system integration.\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eDuplex Telemetry\u003c\/b\u003e\u003c\/p\u003e\r\n\u003cul\u003e\n\u003cli\u003eTemperature - Temperature of the Central Box\r\n\u003c\/li\u003e\n\u003cli\u003eVoltage In - Voltage of Individual Outputs of the Central Box\r\n\u003c\/li\u003e\n\u003cli\u003eCurrent - Current Drawn from the Battery\r\n\u003c\/li\u003e\n\u003cli\u003eCapacity - Capacity Taken from the Batteries\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Jeti","offers":[{"title":"Default Title","offer_id":46722679603389,"sku":"JETI-BOX310R3-3","price":615.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/JETI-BOX310R3-3-central-box-power-distribution-unit-magnetic-switch.jpg?v=1777484691"},{"product_id":"central-box-320-18-channel-pdu-with-magnetic-switch","title":"Central Box 320 18-Channel PDU with Magnetic Switch","description":"\u003ch2\u003eJeti USA Central Box 320 Power Distribution Unit with Magnetic Switch\u003c\/h2\u003e\r\n\u003cul\u003e\n\u003cli\u003eControl Management with Configurable Servo Output\r\n\u003c\/li\u003e\n\u003cli\u003ePower Distribution with Two Independent Inputs\r\n\u003c\/li\u003e\n\u003cli\u003eServo Overload Protection for All 18 Output Channels (10x Standard, 8x HD)\r\n\u003c\/li\u003e\n\u003cli\u003eHeavy Duty Aluminum Case for Extra Cooling and Protection\r\n\u003c\/li\u003e\n\u003cli\u003eFirmware Updatable via Jeti USB Adapter and Jeti Studio\r\n\u003c\/li\u003e\n\u003cli\u003eWirelessly Programmable Using DC\/DS Tx Device Explorer\r\n\u003c\/li\u003e\n\u003cli\u003eIndependent Receiver Signal Inputs (R1, R2, E1\/R3)\r\n\u003c\/li\u003e\n\u003cli\u003eUp to (18) Standard PWM and Ditex Telemetry Servo Outputs\r\n\u003c\/li\u003e\n\u003cli\u003eUp to (4) four Telemetry Sensors Inputs (E1\/R3, E2, E3, E4)\r\n\u003c\/li\u003e\n\u003cli\u003eInput for Included Magnetic or Optional Wireless Switch\r\n\u003c\/li\u003e\n\u003cli\u003eInput\/Output Voltage: 4V - 14V\/5V - 8.4V (0.1V Steps)\r\n\u003c\/li\u003e\n\u003cli\u003eOutput Current: 20A Continues\/80A Peak\r\n\u003c\/li\u003e\n\u003cli\u003eDimensions\/Weight: 107mm x 66mm x 21mm\/135g\u003c\/li\u003e\n\u003c\/ul\u003e\r\n\u003cp\u003eThe Jeti Central Box 320 is fully programmable switchboard with two (2) independent, stabilized power inputs with single voltage regulator (20A Continues\/80A Peak) designed for complete power and signal management of servos with great emphasis on safety. The Jeti Central Box 320 has a unique design that provides overload protection for up to 10 Standard (up to 415 oz\/in, 30 kg\/cm) and 8 Ultra Torque (up to 830 oz\/in, 60 kg\/cm) servos. The Jeti Central Box 320 features true Battery Redundancy, Ditex Servo Telemetry, Jeti EX Telemetry, and up to three (3) receiver inputs (2x 2.4GHz and 1x 900MHz) with serial (PPM, EX Bus) output for complete Power \u0026amp; RF Signal Redundancy. In addition the Jeti Central Box 320 has up to four (4) independent E1\/E4 telemetry inputs. The onboard BEC allows the output voltage for the servo to be adjusted from 5V to 8.4V in 0.1V steps using Jeti Transmitter Device Explorer interface.\u003c\/p\u003e\r\n\u003cp\u003eWith Jeti Duplex 2.4GHz DC\/DS transmitters, the full potential of the Central Box can be used, such as easy way to wirelessly configure the Servo Outputs, Ditex Servo \u0026amp; EX Telemetry, Fail-Safe Setting or Function Assignment.\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003ePower Supply\u003c\/b\u003e\u003cbr\u003eThe power batteries are connected to the Central Box using MPX connectors. The Central Box allows two batteries to be connected. During use, the power is actually supplied from the battery with the higher voltage. If the voltage is the same, the power can be used from both batteries at the same time. When the voltage of the batteries is different, the power is not shared and each pack is isolated from the other. This allows you to use batteries of different capacity, number of cells and chemistry type. If the power for the Central Box is provided only from one battery, it can be connected via battery (BATT 1) Input.\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eMagnetic Switch (Included)\u003c\/b\u003e\u003cbr\u003eThe magnetic switch is used to turn the Central Box ON\/OFF and is connected to a separate slot labeled \"SW\". To turn on the Central Box using the magnetic switch it is necessary to hold the supplied magnet (key) to the target so that the key and the target on the magnetic switch are properly oriented.\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eWireless Switch R3\/RSW (Optional)\u003c\/b\u003e\u003cbr\u003eState-of-the-art device that sets Jeti as a leading designer and manufacturer of radio control systems. Wireless power switch is fully integrated into the 2.4GHz radio system. For first time your receiver can be turned ON\/OFF with simple flipping of the switch wirelessly from the Jeti DC\/DS transmitters.\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eFail-Safe Setting\u003c\/b\u003e\u003cbr\u003e\r\nSwitches ON\/OFF of the Fail-Safe function. If the Fail-Safe function is deactivated, there is no signal generated in any Central Box outputs at the signal loss. If you activate the Fail Safe function, you can also select how the Central Box responds at signal loss for each of the individual outputs.\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eServo Mapping\u003c\/b\u003e\u003c\/p\u003e\r\n\u003cul\u003e\n\u003cli\u003eServo No. - Assigning outputs of the transmitter to the Central Box outputs.\r\n\u003c\/li\u003e\n\u003cli\u003eGroup - Assigning specific output to the group of output impulses that will be generated from the receiver in the same time.\u003c\/li\u003e\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cb\u003eDitex Servo Telemetry\u003c\/b\u003e\u003cbr\u003eThe Ditex telemetry servos offer groundbreaking design features combined with incredible reliability. Advanced radio control telemetry systems such as Jeti Duplex are capable of providing real-time information including complete telemetry data (Torque, Min\/Max Current, Voltage, Angle, Telemetry Alarms) and full system integration.\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eDuplex Telemetry\u003c\/b\u003e\u003c\/p\u003e\r\n\u003cul\u003e\n\u003cli\u003eTemperature - Temperature of the Central Box\r\n\u003c\/li\u003e\n\u003cli\u003eShorted Outputs No. - Number of Overloaded Outputs\r\n\u003c\/li\u003e\n\u003cli\u003eVoltage In - Voltage of Individual Outputs of the Central Box\r\n\u003c\/li\u003e\n\u003cli\u003eCurrent - Current Drawn from the Battery\r\n\u003c\/li\u003e\n\u003cli\u003eCapacity - Capacity Taken from the Batteries\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Jeti","offers":[{"title":"Default Title","offer_id":46722679636157,"sku":"JETI-BOX320","price":435.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/JETI-BOX320-central-box-power-distribution-unit-magnetic-switch.jpg?v=1777484690"},{"product_id":"central-box-400-24-channel-pdu-with-magnetic-switch","title":"Central Box 400 24-Channel PDU with Magnetic Switch","description":"\u003ch2\u003eJeti USA Central Box 400 Power Distribution Unit with Magnetic Switch\u003c\/h2\u003e\n\u003ch3\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/jeti-centralbox400w.pdf?v=1778185677\" target=\"_blank\" rel=\"noopener\"\u003eDownload the Instruction Manual Here\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/jeti-centralbox400w-chart.pdf?v=1778185672\" target=\"_blank\" rel=\"noopener\"\u003eDownload the Menu Diagram Here\u003c\/a\u003e\n\u003c\/h3\u003e\n\u003ch3\u003eIncludes: Central Box 400, Magnetic Switch and Key Install Hardware, USB Cable\u003c\/h3\u003e\n\u003cp\u003eThe Central Box 400 is fully programmable switchboard with two (2) independent, stabilized power voltage regulators (30A Continues\/230A Peak) designed for complete power and signal management of servos with great emphasis on safety. The Central Box 400 has a unique design that provides power management, servo assignment, telemetry data stream, and overload protection for each one of the servo outputs. The Central Box 400 can manage up to two batteries and fully supports the Jeti EX telemetry data stream. Up to two receivers with serial (PPM, EX Bus, UDI) output as well as two power batteries can be connected at the same time to the Central Box for complete Power \u0026amp; RF signal redundancy. In addition the Central Box 400 has up to four (4) independent Ext1\/Ext4 telemetry inputs and two (2) stabilized BEC outputs for additional electronic devices. For more safety, the Central Box 400 contains two switching regulators connected in parallel. The adjustable voltage at the BEC output is always the same as voltage supplied to the servos. Voltage for the servo can be adjusted from 5V to 8V in 0.1V steps.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSolid, CNC Cut Aluminum Case with Fully Integrated Voltage Regulators\u003c\/li\u003e\n\u003cli\u003eControl Management with Full Individually Configurable Servo Outputs\u003c\/li\u003e\n\u003cli\u003eFully Redundant Power Management with Two Independent Battery Inputs\u003c\/li\u003e\n\u003cli\u003eTwo Independent Power Voltage Regulators (Transmitter Wirelessly Adjustable)\u003c\/li\u003e\n\u003cli\u003eFirmware Updatable via USB Port\u003c\/li\u003e\n\u003cli\u003eJeti Duplex EX Bus, UDI or PPM Compatible\u003c\/li\u003e\n\u003cli\u003eWirelessly Programmable Using DC\/DS Tx Device Explorer\u003c\/li\u003e\n\u003cli\u003eTwo Independent Programmable 15A Power Outputs (BEC1, BEC2)\u003c\/li\u003e\n\u003cli\u003eIndependent Receiver Signal Inputs (SAT1, SAT2)\u003c\/li\u003e\n\u003cli\u003eUp to 24x Servo Outputs with Overload Protection\u003c\/li\u003e\n\u003cli\u003eUp to 4x Telemetry Sensors Inputs (Ext1\u003c\/li\u003e\n\u003cli\u003eExt4)\u003c\/li\u003e\n\u003cli\u003eInput for Included Magnetic or R3\/RSW Wireless Switch\u003c\/li\u003e\n\u003cli\u003eInput Voltage: 6-17V (2S-4S)\u003c\/li\u003e\n\u003cli\u003eOutput Current: 30A Continues\/230A Peak\u003c\/li\u003e\n\u003cli\u003eOutput Voltage: 5-8V (0.1V Steps)\u003c\/li\u003e\n\u003cli\u003eDimensions\/Weight: 131mm x 88mm x 19mm\/270g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003ePower Management (Standard\/Advanced)\u003c\/b\u003e\u003cbr\u003eThe power batteries are connected to the Central Box using MPX connectors. The Central Box allows two batteries to be connected. During use, the power is actually supplied from the battery with the higher voltage. If the voltage is the same, the power can be used from both batteries at the same time. When the voltage of the batteries is different, the power is not shared and each pack is isolated from the other. This allows you to use batteries of different capacity, number of cells and chemistry type. If the power for the Central Box 400 is provided only from one battery, it can be connected via either battery (BATT1\/2) inputs.\u003c\/p\u003e\n\u003cp\u003eIn advance power setting you can independently adjust power input voltages. This way the battery with higher voltage can be used only as power battery backup and you can avoid constant charging and cycling both receiver battery packs.\u003c\/p\u003e\n\u003cp\u003eWith Jeti Duplex 2.4GHz DC\/DS transmitters, the full potential of the Central Box can be used, such as an easy way to wirelessly configure the Servo Outputs, EX Telemetry, Fail-Safe Setting or Fast Servo Response.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eData Recording \u0026amp; Download\u003c\/b\u003e\u003cbr\u003eCentral Box 400 is equipped with 8MB internal memory. The memory is used to store the telemetry data from the Central Box and from all connected sensors. The data log file uses standard FAT32 system, all files containing the telemetry data are located in the Log. directory. The telemetry recording starts automatically if the Central Box detects a receiver signal providing the information on Rx1 or Rx2 channels. The recording stops automatically when the Central Box is switched OFF.\u003c\/p\u003e\n\u003cp\u003eIf you connect Central Box to the PC using the USB port. The PC detects Central Box as a mass storage device. After the Central Box is connected to the PC, it becomes inactive and can be used only for data reading.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eJetiBox Configuration\u003cbr\u003e\u003c\/b\u003e The JetiBox monitor\/programmer can be used for parameter setting and retrieving data. After connecting to the Central Box (Ext4), a startup screen appears that contains identification of the device in the first line of the JetiBox display. The second line contains the data showing the consumed capacity of batteries. By pushing the R button (to the right) on the JETIBOX, you get to the expander menu.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMagnetic Switch\u003c\/b\u003e\u003cbr\u003eThe magnetic switch is used to turn the Central Box ON\/OFF and is connected to a separate slot labeled \"Switch\". To turn on the Central Box using the magnetic switch it is necessary to hold the supplied magnet (key) to the target so that the key and the target on the magnetic switch are properly oriented.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWireless Switch R3\/RSW (Optional)\u003c\/b\u003e\u003cbr\u003eState-of-the-art device that sets Jeti as a leading designer and manufacturer of radio control systems. Wireless power switch is fully integrated into the 2.4GHz radio system. For first time your receiver can be turned ON\/OFF with simple flipping of the switch wirelessly from the Jeti DC\/DS transmitters.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFail-Safe Setting\u003c\/b\u003e\u003cbr\u003eSwitches ON\/OFF of the Fail-Safe function. If the Fail-Safe function is deactivated, there is no signal generated in any Central Box outputs at the signal loss. If you activate the Fail Safe function, you can also select how the Central Box responds at signal loss for each of the individual outputs.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eServo Mapping\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eServo No. - Assigning outputs of the transmitter to the Central Box outputs.\u003c\/li\u003e\n\u003cli\u003eGroup - Assigning specific output to the group of output impulses that will be generated from the receiver in the same time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eDuplex Telemetry\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature - Temperature of the Central Box\u003c\/li\u003e\n\u003cli\u003eShorted Outputs No. - Number of Overloaded Outputs\u003c\/li\u003e\n\u003cli\u003eVoltage In - Voltage of Individual Outputs of the Central Box\u003c\/li\u003e\n\u003cli\u003eCurrent - Current Drawn from the Battery\u003c\/li\u003e\n\u003cli\u003eCapacity - Capacity Taken from the Batteries\u003c\/li\u003e\n\u003cli\u003eBEC Voltage - BEC Power Output Voltages (BEC1, BEC2)\u003c\/li\u003e\n\u003cli\u003eOutput Voltage - Voltage Supplied to the Servos\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eTelemetry Min\/Max\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClear Min\/Max Switch - Place where you can assign a control (switch, stick or knob) on the DC\/DS transmitter which clears the recorded data and minimum\/maximum values.\u003c\/li\u003e\n\u003cli\u003eClear Now - Allows you to immediately clear the recorded data and minimum\/maximum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eData Recording\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFile Size - Size of the data file.\u003c\/li\u003e\n\u003cli\u003eFree Memory - Remaining empty space for data storage.\u003c\/li\u003e\n\u003cli\u003eRecord Central Box telemetry - Enables\/Disables telemetry data recording.\u003c\/li\u003e\n\u003cli\u003eRecord Ext. Telemetry - Enables\/Disables telemetry data recording from sensors connected to Ext1-4.\u003c\/li\u003e\n\u003cli\u003eFormat the Internal Storage - Internal memory deletion.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Jeti","offers":[{"title":"Default Title","offer_id":46722679668925,"sku":"JETI-BOX400","price":695.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/JETI-BOX400-central-box-power-distribution-unit-magnetic-switch.jpg?v=1777484690"},{"product_id":"powerbox-pioneer-with-sensor-switch","title":"PowerBox Pioneer, with Sensor Switch","description":"\u003ch2\u003ePowerBox Pioneer, with Sensor Switch\u003c\/h2\u003e \u003cp\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e PowerBox Pioneer, MicroSwitch, 2 patch leads, 1 double-sided self-adhesive pad, Operating instructions in german and english\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e14 channels \u003c\/li\u003e\n\u003cli\u003eHigh-performance battery backer with high continuous load capacity \u003c\/li\u003e\n\u003cli\u003eDuplicated circuitry for the entire power electronics \u003c\/li\u003e\n\u003cli\u003eRedundant electronic switch \u003c\/li\u003e\n\u003cli\u003eAll features can be controlled using PowerBox and Jeti transmitters \u003c\/li\u003e\n\u003cli\u003eAll systems can be operated using BlueCom or PowerBox USB \u003c\/li\u003e\n\u003cli\u003eIntegrated iGyro technology of the latest type, with iGyro Sat as gyro sensor \u003c\/li\u003e\n\u003cli\u003eNine independent gyro outputs for: 3x aileron, 3x elevator, 3x rudder \u003c\/li\u003e\n\u003cli\u003eSpecial regulatory algorithm for fixed-wing models \u003c\/li\u003e\n\u003cli\u003eDetects all transmitter mixers \u003c\/li\u003e\n\u003cli\u003eUltra-simple gyro programming in just a few minutes \u003c\/li\u003e\n\u003cli\u003eOptional GPS mode for speed-dependent gyro compensation \u003c\/li\u003e\n\u003cli\u003eTelemetry data for PowerBox P²BUS, Jeti Ex-BUS and Futaba S.BUS2 \u003c\/li\u003e\n\u003cli\u003eTransmission of voltage, current, capacity, lost frames and holds \u003c\/li\u003e\n\u003cli\u003eUser-variable servo frame rate: 10ms, 12ms, 14ms, 16ms, 18ms \u003c\/li\u003e\n\u003cli\u003eSuppression of servo feedback currents \u003c\/li\u003e\n\u003cli\u003eUltra-modern 32-bit micro-processor ensures swift, accurate signal processing \u003c\/li\u003e\n\u003cli\u003eEfficient heat dissipation via the high-quality machined and anodized aluminum case \u003c\/li\u003e\n\u003cli\u003eMachined and anodized aluminum switch housing \u003c\/li\u003e\n\u003cli\u003eSpace-saving low-profile format \u003c\/li\u003e\n\u003cli\u003eUltra-lightweight construction\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eThe PowerBox Pioneer is the latest development of a 14-channel power supply unit without voltage regulation, designed for HV servos. Since the unit has no voltage regulators, nor the large heat-sink surfaces required for them, it offers ultra-compact dimensions. Even so, the Pioneer still provides redundancy, as is the standard for all power supply units made by PowerBox-Systems. The output section and the switch controller are duplicated in order to guarantee maximum security.\u003c\/p\u003e \u003cp\u003eA feature which makes the Pioneer unique in its class is its integral iGyro technology, which requires only the optional iGyro Sat as sensor unit. When plugged in, the sensor transforms the power supply unit into a high-performance 9-axis gyro of the latest generation. The integrated iGyro is ultra-simple to use, and can be set up in just a few minutes, ready for the initial trimming flight. The Pioneer offers any number of facilities for fine-tuning, making it suitable for complex models and perfectionists. Stick priority, lock-in feel and gyro characteristics can be adjusted separately for each axis and for two ranges, to name just the most important of them.\u003c\/p\u003e \u003cp\u003eThe whole package is rounded off by convenience and ease of operation, as PowerBox and Jeti pilots can set up and control all aspects of the Pioneer from the transmitter! Optionally - and for Futaba pilots - the Pioneer can be set up using the BlueCom adapter and the smartphone app, or using a PC in conjunction with the USB interface.\u003c\/p\u003e \u003cp\u003eIn performance terms the compact Pioneer concedes nothing to the larger backers. Many series of tests have been carried out with a 40A load for several minutes, and we guarantee a continuous current capacity of 20A. The elegant aluminum heat-sink ensures the necessary heat dissipation, and even the external switch is supplied in a top-quality anodised aluminum case, machined from solid.\u003c\/p\u003e","brand":"PowerBox Systems","offers":[{"title":"Default Title","offer_id":46724571234493,"sku":"PBS-4100","price":258.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/PBS-4100-powerbox-pioneer-microswitch.jpg?v=1777502117"},{"product_id":"powerbox-pioneer-with-magnetic-switch","title":"PowerBox Pioneer, with Magnetic Switch","description":"\u003ch2\u003ePowerBox Pioneer, with Magnetic Switch\u003c\/h2\u003e \u003cp\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e PowerBox Pioneer, MicroSwitch, 2 patch leads, 1 double-sided self-adhesive pad, Operating instructions in german and english\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e14 channels \u003c\/li\u003e\n\u003cli\u003eHigh-performance battery backer with high continuous load capacity \u003c\/li\u003e\n\u003cli\u003eDuplicated circuitry for the entire power electronics \u003c\/li\u003e\n\u003cli\u003eRedundant electronic switch \u003c\/li\u003e\n\u003cli\u003eAll features can be controlled using PowerBox and Jeti transmitters \u003c\/li\u003e\n\u003cli\u003eAll systems can be operated using BlueCom or PowerBox USB \u003c\/li\u003e\n\u003cli\u003eIntegrated iGyro technology of the latest type, with iGyro Sat as gyro sensor \u003c\/li\u003e\n\u003cli\u003eNine independent gyro outputs for: 3x aileron, 3x elevator, 3x rudder \u003c\/li\u003e\n\u003cli\u003eSpecial regulatory algorithm for fixed-wing models \u003c\/li\u003e\n\u003cli\u003eDetects all transmitter mixers \u003c\/li\u003e\n\u003cli\u003eUltra-simple gyro programming in just a few minutes \u003c\/li\u003e\n\u003cli\u003eOptional GPS mode for speed-dependent gyro compensation \u003c\/li\u003e\n\u003cli\u003eTelemetry data for PowerBox P²BUS, Jeti Ex-BUS and Futaba S.BUS2 \u003c\/li\u003e\n\u003cli\u003eTransmission of voltage, current, capacity, lost frames and holds \u003c\/li\u003e\n\u003cli\u003eUser-variable servo frame rate: 10ms, 12ms, 14ms, 16ms, 18ms \u003c\/li\u003e\n\u003cli\u003eSuppression of servo feedback currents \u003c\/li\u003e\n\u003cli\u003eUltra-modern 32-bit micro-processor ensures swift, accurate signal processing \u003c\/li\u003e\n\u003cli\u003eEfficient heat dissipation via the high-quality machined and anodized aluminum case \u003c\/li\u003e\n\u003cli\u003eMachined and anodized aluminum switch housing \u003c\/li\u003e\n\u003cli\u003eSpace-saving low-profile format \u003c\/li\u003e\n\u003cli\u003eUltra-lightweight construction\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eThe PowerBox Pioneer is the latest development of a 14-channel power supply unit without voltage regulation, designed for HV servos. Since the unit has no voltage regulators, nor the large heat-sink surfaces required for them, it offers ultra-compact dimensions. Even so, the Pioneer still provides redundancy, as is the standard for all power supply units made by PowerBox-Systems. The output section and the switch controller are duplicated in order to guarantee maximum security.\u003c\/p\u003e \u003cp\u003eA feature which makes the Pioneer unique in its class is its integral iGyro technology, which requires only the optional iGyro Sat as sensor unit. When plugged in, the sensor transforms the power supply unit into a high-performance 9-axis gyro of the latest generation. The integrated iGyro is ultra-simple to use, and can be set up in just a few minutes, ready for the initial trimming flight. The Pioneer offers any number of facilities for fine-tuning, making it suitable for complex models and perfectionists. Stick priority, lock-in feel and gyro characteristics can be adjusted separately for each axis and for two ranges, to name just the most important of them.\u003c\/p\u003e \u003cp\u003eThe whole package is rounded off by convenience and ease of operation, as PowerBox and Jeti pilots can set up and control all aspects of the Pioneer from the transmitter! Optionally - and for Futaba pilots - the Pioneer can be set up using the BlueCom adapter and the smartphone app, or using a PC in conjunction with the USB interface.\u003c\/p\u003e \u003cp\u003eIn performance terms the compact Pioneer concedes nothing to the larger backers. Many series of tests have been carried out with a 40A load for several minutes, and we guarantee a continuous current capacity of 20A. The elegant aluminum heat-sink ensures the necessary heat dissipation, and even the external switch is supplied in a top-quality anodised aluminum case, machined from solid.\u003c\/p\u003e","brand":"PowerBox Systems","offers":[{"title":"Default Title","offer_id":46724571267261,"sku":"PBS-4102","price":282.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/PBS-4102-powerbox-pioneer-magnetic-switch.jpg?v=1777502120"},{"product_id":"powerbox-mercury-sr2-with-internal-igyro-oled-sensor-switch","title":"PowerBox Mercury SR2, with Internal iGyro, OLED \u0026 Sensor Switch","description":"\u003ch2\u003ePowerBox Mercury SR2, with Internal iGyro, OLED \u0026amp; Sensor Switch\u003c\/h2\u003e \u003cp\u003eThe PowerBox Mercury SR2 is your first choice when you need a small, high-performance power supply unit with maximum functionality. All the features which are usually the preserve of the larger power supply units are present in the compact PowerBox Mercury SR2: iGyro, servo matching, unrestricted channel assignment and even a door sequencer: it really is a complete system!\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003eIntegral iGyro: Triple-axis gyro system with attitude assist function \u003c\/li\u003e\n\u003cli\u003eExpanded setup assistant for ultra-simple operation \u003c\/li\u003e\n\u003cli\u003eSpecial regulatory algorithm for fixed-wing model aircraft \u003c\/li\u003e\n\u003cli\u003eSix independent gyro outputs for: 2x ailerons, 2x elevators, 2x rudders \u003c\/li\u003e\n\u003cli\u003eSpecial thrust vector support \u003c\/li\u003e\n\u003cli\u003eGPS-regulated gyro gain \u003c\/li\u003e\n\u003cli\u003eExtremely accurate six-axis MEMS sensor \u003c\/li\u003e\n\u003cli\u003eIntegral Delta and V-tail mixer \u003c\/li\u003e\n\u003cli\u003eDoor sequencer: freely programmable outputs with set-up assistant \u003c\/li\u003e\n\u003cli\u003eServo-Match function: servo centre, end-points and reverse for all 15 servo outputs \u003c\/li\u003e\n\u003cli\u003eSRS: Serial Receiver System provides the facility to use receivers with serial interface: Futaba S-Bus, Spektrum DSM2 und DSMX, Jeti UDI, Multiplex M-Link, HoTT and JR X-BUS \u003c\/li\u003e\n\u003cli\u003eUnrestricted channel assignment for all 15 PowerBox outputs \u003c\/li\u003e\n\u003cli\u003eGraphic OLED screen with 128 x 64 pixels \u003c\/li\u003e\n\u003cli\u003eExtremely user-friendly menu-based programming using the SensorSwitch \u003c\/li\u003e\n\u003cli\u003e15 channels \u003c\/li\u003e\n\u003cli\u003eSignal amplification and interference suppression for all 15 outputs \u003c\/li\u003e\n\u003cli\u003eFlight recorder, recording of lost frames and fail-safe events \u003c\/li\u003e\n\u003cli\u003eVariable frame rate, range 12ms – 21ms \u003c\/li\u003e\n\u003cli\u003e16-bit processors for fast, high-resolution signal processing \u003c\/li\u003e\n\u003cli\u003eDouble-regulated output voltages for receivers and servos \u003c\/li\u003e\n\u003cli\u003eRegulated output voltage 5.9V or 7.4V \u003c\/li\u003e\n\u003cli\u003eConnection facilities for Futaba, Jeti, Spektrum, HoTT, JR and Multiplex MSB downlink bus systems \u003c\/li\u003e\n\u003cli\u003eDirect transmission of the battery informations, receiver data and GPS data to the transmitter \u003c\/li\u003e\n\u003cli\u003eSeparate voltage display for each battery \u003c\/li\u003e\n\u003cli\u003eMinimum value memory alerts the user to voltage collapses \u003c\/li\u003e\n\u003cli\u003eLarge-area heat-sinks for high regulator performance \u003c\/li\u003e\n\u003cli\u003eRegulator monitoring, regulator error indicator \u003c\/li\u003e\n\u003cli\u003eSupport for four battery types: LiPo, LiIon, NiMh\/NiCd, LiFePo \u003c\/li\u003e\n\u003cli\u003eSuppression of any servo feedback currents which may occur \u003c\/li\u003e\n\u003cli\u003eUpdateable with PowerBox Systems USB Interface or BlueCom adapter\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eThe PowerBox Mercury SR2 provides 16 freely assignable outputs with servo matching, i.e. the travel of each channel can be adjusted at five points. If you fly models with large control surfaces, in which individual control surfaces are actuated by two servos, the unique auto-match function can be used to match both servos to each other accurately in a matter of seconds.\u003c\/p\u003e \u003cp\u003eThe integral iGyro software requires a sensor unit in the form of an iGyroSAT; with this it can address and adjust three aileron, three elevator and three rudder functions individually. The Setup Assistant simplifies the initial adjustments to the gyro system, reducing the time required to just a few minutes. The first time the system is used, the Assistant gathers basic information regarding wing and tail format and the vector control system - if present. A complex model matrix then works in the background, calculating which servo needs to be connected to which output, at the same time linking the corresponding gyro function. A wide range of additional Expert settings offers total freedom, enabling you to fine-tune the gyro system to your particular requirements.\u003c\/p\u003e \u003cp\u003eIn addition the GPSIII or PBS-TAV (True Airspeed Vario) can also be connected to the FastTrack input, making it possible to vary gyro gain according to airspeed. All GPS or TAV information is even available for telemetry at the transmitter!\u003c\/p\u003e \u003cp\u003eThe PowerBox Mercury SR2 supplies a regulated output voltage which can be set to 6.0V or 7.8V. The two voltage regulators offer generous capacity thanks to the machined aluminium heatsink on the top and bottom surfaces, enabling the unit to cope effortlessly with the current-hungry servos used in 3D machines.\u003c\/p\u003e \u003cp\u003eThe integral door sequencer is capable of controlling one undercarriage system and up to three wheel doors. If the Setup Assistant is used, it takes just a few minutes to learn the end-points of door travel, while three pre-defined modes cover the vast majority of undercarriage processes. Once initially set up, the timing of the process can be fine-tuned manually to any values you wish.\u003c\/p\u003e \u003cp\u003eFor PowerBox and Jeti pilots it is possible to control and adjust virtually every* aspect of the PowerBox Mercury SR2 from your transmitter! Full telemetry for battery and receiver data is present for all supported systems.\u003c\/p\u003e \u003cp\u003e\u003cb\u003e*with the exception of the door sequence and Setup Assistant\u003c\/b\u003e\u003c\/p\u003e","brand":"PowerBox Systems","offers":[{"title":"Default Title","offer_id":46724571300029,"sku":"PBS-4130","price":410.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/PBS-4130-powerbox-mercury-sr2.jpg?v=1777502118"},{"product_id":"powerbox-competition-sr2-with-sensor-switch-display","title":"PowerBox Competition SR2, with Sensor Switch \u0026 Display","description":"\u003ch2\u003ePowerBox Competition SR2, with Sensor Switch \u0026amp; Display\u003c\/h2\u003e \u003cp\u003e\u003cb\u003eThe Competition SR2 offers outstanding functionality, and sets new standards in its class!\u003c\/b\u003e\u003c\/p\u003e \u003cp\u003eIt is now ten years ago to the month that the first Competition SRS was introduced. At that time it represented a milestone in the redundant deployment of receivers using our new type of bus technology. The unrestricted output assignment, servo matching and linking to early telemetry systems were unique features, and remained so for a long time.\u003c\/p\u003e \u003cp\u003e\u003cb\u003eBox Contents:\u003c\/b\u003e PowerBox Competition SR2, TFT Display, SensorSwitch, 2 patch-leads, 4 rubber grommets and brass spacer sleeves, factory-fitted, 8 retaining screws, Operating instructions in german and english\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e22 channels \u003c\/li\u003e\n\u003cli\u003eHigh-performance battery backer with high continuous load capacity \u003c\/li\u003e\n\u003cli\u003e2.4” TFT screen, legible in sunlight \u003c\/li\u003e\n\u003cli\u003eBi-lingual menu system \u003c\/li\u003e\n\u003cli\u003eConsistent duplication of all power electronics \u003c\/li\u003e\n\u003cli\u003eRedundant electronic switch \u003c\/li\u003e\n\u003cli\u003eServo matching for all 22 outputs \u003c\/li\u003e\n\u003cli\u003eAuto matching function \u003c\/li\u003e\n\u003cli\u003eTwo independent door sequencers with Setup Assistant \u003c\/li\u003e\n\u003cli\u003eThe latest integrated iGyro technology, using the iGyroSAT as gyro sensor \u003c\/li\u003e\n\u003cli\u003eTwelve independent gyro outputs for: 4x aileron, 4x elevator, 4x rudder \u003c\/li\u003e\n\u003cli\u003eIndividual gain control for all twelve gyro outputs \u003c\/li\u003e\n\u003cli\u003eSpecial regulatory algorithm for fixed-wing models \u003c\/li\u003e\n\u003cli\u003eSystem detects all transmitter mixers \u003c\/li\u003e\n\u003cli\u003eFour selectable output voltages: 6.0 V, 7.4 V, 7.8 V or unregulated \u003c\/li\u003e\n\u003cli\u003eGraphic menu diagrams ensure ultra-simple programming \u003c\/li\u003e\n\u003cli\u003eFast basic setup procedure using the sophisticated Assistant \u003c\/li\u003e\n\u003cli\u003eOptional GPS III for speed-dependent gyro compensation \u003c\/li\u003e\n\u003cli\u003eTelemetry data for PowerBox P²BUS, Futaba S.BUS2, Jeti Ex-BUS, Spektrum \u003c\/li\u003e\n\u003cli\u003eSRXL2, Multiplex M-Link and Graupner HoTT \u003c\/li\u003e\n\u003cli\u003eTransmission of battery, receiver and GPS* data \u003c\/li\u003e\n\u003cli\u003eVirtually all features can be controlled from PowerBox and Jeti transmitters \u003c\/li\u003e\n\u003cli\u003eSelectable servo frame rate: 10ms, 12ms, 14ms, 16ms, 18ms \u003c\/li\u003e\n\u003cli\u003eServo feedback current suppression \u003c\/li\u003e\n\u003cli\u003eLatest 32-bit micro-processor for precise, high-speed signal processing \u003c\/li\u003e\n\u003cli\u003eHigh-performance machined heat-sink for optimised heat diffusion \u003c\/li\u003e\n\u003cli\u003eMachined, anodised aluminium switch and screen case \u003c\/li\u003e\n\u003cli\u003eCompact dimensions\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eTechnology has continued to develop, and modellers' requirements have become more exacting. Here at PowerBox Systems we are proud to present our latest development: the PowerBox Competition SR2. Incorporating a new external look and the very latest technology, this single unit integrates more than twenty years of experience in the design and construction of airborne electronics.\u003c\/p\u003e \u003cp\u003eThe external changes are immediately evident: the most obvious and eye-catching feature is the new full-colour TFT screen, which is clearly legible even in full sunshine. The size of the screen has allowed us to include a self-explanatory menu structure which is so simple to use that its operation has raised not a single query from our test-pilots. Another obvious change is the large heat-sink, machined from solid metal, which significantly enhances the performance of the power supply. At the same time we were able to reduce the overall size of the Competition SR2 substantially. The associated Sensor-Switch and TFT screen are also housed in a machined aluminium case, matching the quality appearance of the SR2 itself.\u003c\/p\u003e \u003cp\u003eHowever, the most significant innovations only become evident once the unit is switched on. The main display contains all the essential data - including battery voltage, current, consumed capacity and all receiver-relevant information - which can be viewed at a glance. The screen also displays status messages concerning the iGyroSAT or GPS III, if connected to the system.\u003c\/p\u003e \u003cp\u003eThe menu system is clearly and logically laid out, and includes many new functions as well as the familiar menu points - and all in two languages: German and English! Important new features implemented in the new Competition SR2 include the most efficient and sophisticated iGyro technology ever developed by PowerBox-Systems.\u003c\/p\u003e \u003cp\u003eUsed in conjunction with the optional iGyroSAT sensor, the system offers twelve gyro axes which cater for every existing model variant. The highly refined Setup Assistant enables the pilot to set up complex models, such as types with dual thrust vectors, ailerons and tailerons, in just a few minutes. Once the Assistant has been completed, the transmitter channels are assigned, the directions of gyro effect are set, and the servos connected to the outputs.\u003c\/p\u003e \u003cp\u003eEach gyro axis can also be finely adjusted individually from the transmitter using separate channels. If an initial test-flight shows up a need to fine-tune the iGyro to meet individual requirements, a whole series of Expert settings cover every possible need.\u003c\/p\u003e \u003cp\u003eThe servo matching feature is now displayed in graphic form on the screen, and the PowerBox Competition SR2 also allows the servo response to be adjusted using five curve points. A new development is automatic servo matching. It is a very simple matter to assign and select one or two servos in addition to the primary one, and these two or three servos can be matched accurately to each other in just a few seconds with a single button-press!\u003c\/p\u003e \u003cp\u003eThe Competition SR2 incorporates two independent door sequencers. The standard function is designed for a retractable undercarriage, while the second can be used to implement systems such as a latching canopy control system without any additional devices. The Setup Assistant is capable of setting up the first door sequencer in just a few minutes, and three modes of operation are available. The graphic on-screen display makes additional non-standard settings very easy to set up; the entire sequential process can be observed at a glance.\u003c\/p\u003e \u003cp\u003eIf you use a PowerBox or Jeti RC system, virtually all* the functions of the Competition SR2 can be controlled and adjusted from the transmitter. The SR2 caters for every aspect of telemetry for battery and receiver data with all supported systems. If a GPS III is connected, then GPS data are also available - limited only by the facilities of the RC system in use.\u003c\/p\u003e \u003cp\u003e\u003ci\u003e*except the sequencers and Setup Assistant\u003c\/i\u003e\u003c\/p\u003e","brand":"PowerBox Systems","offers":[{"title":"Default Title","offer_id":46724571332797,"sku":"PBS-4450","price":518.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/PBS-4450-powerbox-competition-sr2.jpg?v=1777502118"},{"product_id":"powerbox-royal-sr2-26-channel-with-display-sensor-switch","title":"PowerBox Royal SR2, 26-Channel, with Display \u0026 Sensor Switch","description":"\u003ch2\u003ePowerBox Royal SR2, 26-Channel, with Display \u0026amp; Sensor Switch\u003c\/h2\u003e \u003cp\u003e\u003cb\u003ePowerBox Royal SR2 Package Includes:\u003c\/b\u003e\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003ePowerBox Royal SR2 \u003c\/li\u003e\n\u003cli\u003eTFT-Display \u003c\/li\u003e\n\u003cli\u003eSensorSwitch \u003c\/li\u003e\n\u003cli\u003e2 three-core patch-leads, 180 mm \u003c\/li\u003e\n\u003cli\u003e4 retaining screws \u003c\/li\u003e\n\u003cli\u003e4 rubber grommets \/ brass spacer sleeves \u003c\/li\u003e\n\u003cli\u003e4 brackets\/covers \u003c\/li\u003e\n\u003cli\u003eOperating instructions in German and English\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eThe PowerBox Royal SR2 once again sets new technical standards, offering a convincing array of features which until now have been the exclusive preserve of professional aviation. P\u003csup\u003e2\u003c\/sup\u003e servo bus, 26 channels, 12-axis gyro, two pairs of regulators and a full-color screen - these are just a few of the technical refinements which the PowerBox Royal SR2 offers the ambitious pilot.\u003c\/p\u003e \u003cp\u003eThe PowerBox Royal SR2 is housed in a high-quality, extremely compact case with integral aluminum heat-sink. The large cooling area dissipates the heat generated by the four regulators, which are wired in pairs to provide energy for all 26 servos. Both regulator pairs can be set to any of four different voltages. This makes it possible to combine standard 6V servos with high-performance HV types, without additional regulator modules.\u003c\/p\u003e \u003cp\u003eFor the first time all the data relating to all the model’s servos can be monitored, and their parameters adjusted from the transmitter. This development has been made possible by the introduction of our P\u003csup\u003e2\u003c\/sup\u003e-BUS protocol, whose aim was to maintain complete control of all the components in the model. The PowerBox Royal SR2 has four fully independent P\u003csup\u003e2\u003c\/sup\u003e-BUS interfaces, which can be set to two different voltage levels.\u003c\/p\u003e \u003cp\u003eThese interfaces can be used to connect servos with an integral P\u003csup\u003e2\u003c\/sup\u003e-BUS, or conventional servos with the new P\u003csup\u003e2\u003c\/sup\u003e-ServoBridge. The P\u003csup\u003e2\u003c\/sup\u003e-ServoBridge is an adapter which converts the P\u003csup\u003e2\u003c\/sup\u003e-BUS into a PWM signal for normal servos; it also has an integral infinitely variable electronic fuse. This has allowed us to implement a bus system in the model which is significantly superior to standard PWM wiring in respect of security and performance.\u003c\/p\u003e \u003cp\u003eAll data relating to the receivers and power supply system are displayed on the full-color screen, and all settings are available in a carefully structured, bi-lingual menu which is easily understood. The TFT screen is also housed in a high-quality aluminum case, and is clearly legible even in full sunshine.\u003c\/p\u003e \u003cp\u003eConnecting the optional iGyro SAT converts the PowerBox Royal SR2 into a 12-axis gyro which has few equals in terms of functionality. The gyro can be set up to suit even the most complicated of models in just a few minutes. After this, the correct gyro gain is set from the transmitter in a test-flight using a rotary control. A whole series of supplementary Expert settings is available to allow the pilot to fine-tune the gyro effect to suit his unique individual preferences. Naturally a GPS III sensor can also be connected to the PowerBox Royal SR2. This unit provides automatic gyro gain adjustment in relation to airspeed.\u003c\/p\u003e \u003cp\u003eThe PowerBox Royal SR2’s 26 outputs are provided with an ample power supply, and they can also be assigned individually to various functions. All outputs can be allocated direct and gyro channels as well as door sequencer functions.\u003c\/p\u003e \u003cp\u003eThe PowerBox Royal SR2 has an automatic servo-matching function which is a new development. This system makes it possible to match a maximum of three servos to each other automatically in just a few seconds using five points. All you have to do is select the servos which are inter-connected mechanically, and start the automatic procedure. Of course, each output can also be adjusted manually using the servo-matching function and the graphic-based menu.\u003c\/p\u003e \u003cp\u003eThe final aspect of the system is its pair of integrated door sequencers. In addition to a retractable undercarriage, it is possible - for example - to implement a latched opening canopy control system without additional devices. The first door sequencer can be set up in just a few minutes with the help of a Setup Assistant, and three modes are available. Additional special settings are equally easy to set up thanks to the on-screen diagrams in which the entire timed sequence can be seen at a glance.\u003c\/p\u003e \u003cp\u003eThe PowerBox Royal SR2 can be set up and controlled virtually completely With the exception of the sequencer and the setup assistant from PowerBox and Jeti transmitters! Telemetry for every aspect of battery and receiver data is available for all supported systems. If a GPS III is connected to the unit, GPS data are also available - in so far as your radio control system supports this.\u003c\/p\u003e","brand":"PowerBox Systems","offers":[{"title":"Default Title","offer_id":46724571365565,"sku":"PBS-4750","price":705.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/PBS-4750-powerbox-royal-sr2.jpg?v=1777502118"},{"product_id":"powerbox-tft-display-for-powerbox-competition-sr2-and-royal-sr2","title":"PowerBox TFT-Display, for PowerBox Competition SR2 and Royal SR2","description":"\u003ch2\u003ePowerBox TFT-Display, for PowerBox Competition SR2 and Royal SR2\u003c\/h2\u003e","brand":"PowerBox Systems","offers":[{"title":"Default Title","offer_id":46724571398333,"sku":"PBS-4772","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/PBS-4772-tft-display.jpg?v=1777502117"},{"product_id":"powerbox-pbx-12x-ultra-compact-servo-distributor-with-electronic-switch","title":"PowerBox PBX-12X Ultra-Compact Servo Distributor, with Electronic Switch","description":"\u003ch2\u003ePowerBox PBX-12X Ultra-Compact Servo Distributor, with Electronic Switch\u003c\/h2\u003e \u003cul\u003e\n\u003cli\u003e12 channels \u003c\/li\u003e\n\u003cli\u003eElectronic switch \u003c\/li\u003e\n\u003cli\u003eMR30 high-current input \u003c\/li\u003e\n\u003cli\u003eTwo serial inputs for the receiving system \u003c\/li\u003e\n\u003cli\u003eAutomatic RC system detection \u003c\/li\u003e\n\u003cli\u003eTelemetry data for PowerBox P²BUS, Jeti Ex-BUS, Spektrum and Futaba S.BUS2 \u003c\/li\u003e\n\u003cli\u003eTransfer of voltage, current, capacity, lost frames and holds \u003c\/li\u003e\n\u003cli\u003eUser-variable servo frame rate: 10ms, 12ms, 14ms, 16ms, 18ms \u003c\/li\u003e\n\u003cli\u003eAll features can be controlled from PowerBox and Jeti transmitters \u003c\/li\u003e\n\u003cli\u003eAll systems can control unit via BlueCom or PowerBox-USB \u003c\/li\u003e\n\u003cli\u003eServo feedback current suppression \u003c\/li\u003e\n\u003cli\u003eMachined and anodized aluminum switch case \u003c\/li\u003e\n\u003cli\u003eSpace-saving design \u003c\/li\u003e\n\u003cli\u003eUltra-low weight \u003c\/li\u003e\n\u003cli\u003eUltra-compact servo distributor with electronic switch and high-current power supply\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eThe PBR-12X is ideal for use in any model where space is limited, but where a large number of channels is required. The square arrangement of the servo sockets allows the PBR-12X to fit even in very narrow fuselages, such as those of, F5J- and F3B-gliders.\u003c\/p\u003e \u003cp\u003eThe integral electronic switch is operated using our MicroSwitch. If there is no space for this, the PBR-12X can be activated simply by plugging in or disconnecting the battery, as it stores the last switched state. The unit features an integral high-current input with a compact MR30 connector in order to cope reliably with the current drain of twelve servos. An MR30 to MPX adapter is included in the set.\u003c\/p\u003e \u003cp\u003eAny receiver with a bus output can be used as the receiving component. The unit automatically detects the bus system to which it is connected, which means that no set-up work is required apart from setting the fail-safe positions. Two receivers can be connected to form the basis for a redundant receiving system. If the PBR-12X detects lost data packets from the first receiver, they are replaced with the data from the second receiver; there is no loss of data.\u003c\/p\u003e \u003cp\u003eThe advantage of separating the receiving section from the servo output is that the receiving component can be installed in the optimum location in the model. For example, if your model has a high carbon fibre content in the area of the wing - fuselage junction , you can install the receiver in the fin.\u003c\/p\u003e \u003cp\u003eThe PBR-12X supplies telemetry data to all the listed radio control systems. In addition to battery voltage, the telemetry output includes current and consumed capacity. Reception data, such as lost frames or holds, are also delivered to most systems.\u003c\/p\u003e","brand":"PowerBox Systems","offers":[{"title":"Default Title","offer_id":46724573135037,"sku":"PBS-8260","price":164.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/PBS-8260-pbr-12x-receiver.jpg?v=1777502116"},{"product_id":"powersystem-sport","title":"PowerSystem Sport","description":"\u003ch2\u003eSmart-Fly PowerSystem Sport\u003c\/h2\u003e \u003cp\u003eThe Smart-Fly PowerSystem Sport is an all new design of our unit for smaller models. It is recommended for 60cc and under 3D models or 75cc and under IMAC and Scale models. It features an all new power connector (XT-30) that greatly enhances high current handling over our previous model (15A continuous, 30A peaks) to handle today's high-current digital servos. Since the XT-30 is not a common connector at this time we provide 2 female XT-30s in the package. We also have adapters that go from popular connectors to XT-30 females. The new unit is also lower profile, improved servo connector retention and a fully enclosed design. It provides a power distribution unit for your smaller aircraft that is light weight and compact. The unit is designed for all receivers, end-loading or top-loading. The unit is designed to work with 2S LiFe or 2S Li-ion\/poly batteries and regulates the servo voltage to 6.0V. It has a 5.0 volt regulator for the receiver that delivers filtered, clean power. The unit has LED indicators for servo and receiver power. All signals, in and out of the unit are buffered and have RF filtering.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003eRecommended for: 60cc and under 3D, 75cc and under IMAC \u0026amp; Scale \u003c\/li\u003e\n\u003cli\u003eLight weight and compact design: 2.9 oz (82g), 2.75” x 4.0”, \u003c\/li\u003e\n\u003cli\u003e6.0V Servo Voltage with 2S LiFe or 2S Li-ion\/poly Batteries \u003c\/li\u003e\n\u003cli\u003eBattery inputs protected against battery faults, lost cell or short \u003c\/li\u003e\n\u003cli\u003eHigh-current XT-30 battery connectors (15A sustained, 30A peak) \u003c\/li\u003e\n\u003cli\u003eFiltered and regulated 5.0V power to receiver \u003c\/li\u003e\n\u003cli\u003eReceivers can be end-loading or top-loading \u003c\/li\u003e\n\u003cli\u003eLED indicators for servo and receiver power \u003c\/li\u003e\n\u003cli\u003eFully buffered signal line for each servo \u003c\/li\u003e\n\u003cli\u003eFull RF filtering of all signals in and out of unit \u003c\/li\u003e\n\u003cli\u003eImpedance matching to reduce signal ringing on long servo leads\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Smart-Fly","offers":[{"title":"Default Title","offer_id":46726182240445,"sku":"SMT-PS-24-1","price":179.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/SMT-PS-24-1-smart-fly-power-system-sport.jpg?v=1777561246"},{"product_id":"powersystem-sport-plus","title":"PowerSystem Sport Plus","description":"\u003ch2\u003eSmart-Fly PowerSystem Sport Plus\u003c\/h2\u003e\n\u003cp\u003eThe Smart-Fly PowerSystem Sport is an all new design of our unit for smaller models. It is recommended for 60cc and under 3D models or 75cc and under IMAC and Scale models. It features an all new power connector (XT-30) that greatly enhances high current handling over our previous model (15A continuous, 30A peaks) to handle today's high-current digital servos. Since the XT-30 is not a common connector at this time we provide 2 female XT-30s in the package. We also have adapters that go from popular connectors to XT-30 females. The new unit is also lower profile, improved servo connector retention and a fully enclosed design. It provides a power distribution unit for your smaller aircraft that is light weight and compact. The unit is designed for all receivers, end-loading or top-loading. The unit is designed to work with 2S LiFe or 2S Li-ion\/poly batteries and regulates the servo voltage to 6.0V. It has a 5.0 volt regulator for the receiver that delivers filtered, clean power. The unit has LED indicators for servo and receiver power. All signals, in and out of the unit are buffered and have RF filtering. The unit also has a built-in Fiber-optic Transmitter for our Ignition Cutoff system. It can be ordered without a Fiber-optic receiver, an Unregulated Fiber-optic receiver or a Regulated Fiber-optic receiver.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRecommended for: 60cc and under 3D, 75cc and under IMAC \u0026amp; Scale\u003c\/li\u003e\n\u003cli\u003eLight weight and compact design: 2.9 oz (82g), 2.75” x 4.0”,\u003c\/li\u003e\n\u003cli\u003e6.0V Servo Voltage with 2S LiFe or 2S Li-ion\/poly Batteries\u003c\/li\u003e\n\u003cli\u003eBattery inputs protected against battery faults, lost cell or short\u003c\/li\u003e\n\u003cli\u003eHigh-current XT-30 battery connectors (15A sustained, 30A peak)\u003c\/li\u003e\n\u003cli\u003eFiltered and regulated 5.0V power to receiver\u003c\/li\u003e\n\u003cli\u003eReceivers can be end-loading or top-loading\u003c\/li\u003e\n\u003cli\u003eLED indicators for servo and receiver power fully buffered signal line for each servo\u003c\/li\u003e\n\u003cli\u003eFull RF filtering of all signals in and out of unit\u003c\/li\u003e\n\u003cli\u003eImpedance matching to reduce signal ringing on long servo leads\u003c\/li\u003e\n\u003cli\u003eIgnition Cutoff Fiber-Optic Transmitter\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Smart-Fly","offers":[{"title":"Default Title","offer_id":46726182305981,"sku":"SMT-PS-24-2","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/SMT-PS-24-2-smart-fly-power-system-sport-plus.jpg?v=1777561245"},{"product_id":"powersystem-sport-eq","title":"PowerSystem Sport EQ","description":"\u003ch2\u003eSmart-Fly PowerSystem Sport EQ\u003c\/h2\u003e \u003cp\u003eThe Smart-Fly PowerSystem Sport EQ is an all new design of our unit for smaller models. It is recommended for 60cc and under 3D models or 75cc and under IMAC and Scale models. It features an all new power connector (XT-30) that greatly enhances high current handling over our previous model (15A continuous, 30A peaks) to handle today's high-current servos. Since the XT-30 is not a common connector at this time we provide 2 female XT-30s in the package. We also have adapters that go from popular connectors to XT-30 females. This unit also features servo matching on 2 channels, each with 2 servo outputs. Each of the 4 servos can individually be reversed and have their center and each endpoint adjusted. The new unit is also lower profile, improved servo connector retention and a fully enclosed design. It provides a power distribution unit for your smaller aircraft that is light weight and compact. The unit is designed for all receivers, end-loading or top-loading. The unit is designed to work with 2S LiFe or 2S Li-ion\/poly batteries and regulates the servo voltage to 6.0V. It has a 5.0 volt regulator for the receiver that delivers filtered, clean power. The unit has LED indicators for servo and receiver power. All signals, in and out of the unit are buffered and have RF filtering.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003eRecommended for: 60cc and under 3D, 75cc and under IMAC \u0026amp; Scale \u003c\/li\u003e\n\u003cli\u003eLight weight and compact design: 2.9 oz (82g), 2.75” x 4.0”, \u003c\/li\u003e\n\u003cli\u003e6.0V Servo Voltage with 2S LiFe or 2S Li-ion\/poly Batteries \u003c\/li\u003e\n\u003cli\u003eBattery inputs protected against battery faults, lost cell or short \u003c\/li\u003e\n\u003cli\u003eHigh-current XT-30 battery connectors (15A sustained, 30A peak) \u003c\/li\u003e\n\u003cli\u003e2 Channels of Servo Matching with 2 Outputs Each \u003c\/li\u003e\n\u003cli\u003eFiltered and regulated 5.0V power to receiver \u003c\/li\u003e\n\u003cli\u003eReceivers can be end-loading or top-loading \u003c\/li\u003e\n\u003cli\u003eLED indicators for servo and receiver power \u003c\/li\u003e\n\u003cli\u003eFully buffered signal line for each servo \u003c\/li\u003e\n\u003cli\u003eFull RF filtering of all signals in and out of unit \u003c\/li\u003e\n\u003cli\u003eImpedance matching to reduce signal ringing on long servo leads\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Smart-Fly","offers":[{"title":"Default Title","offer_id":46726182371517,"sku":"SMT-PS-24-3","price":209.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/SMT-PS-24-3-smart-fly-power-system-sport-eq-equlaizer.jpg?v=1777561246"},{"product_id":"powersystem-sport-eq-plus","title":"PowerSystem Sport EQ Plus","description":"\u003ch2\u003eSmart-Fly PowerSystem Sport EQ Plus\u003c\/h2\u003e \u003cp\u003eThe Smart-Fly PowerSystem Sport EQ Plus is an all new design of our unit for smaller models. It is recommended for 60cc and under 3D models or 75cc and under IMAC and Scale models. It features an all new power connector (XT-30) that greatly enhances high current handling over our previous model (15A continuous, 30A peaks) to handle today's high current servos. Since the XT-30 is not a common connector at this time we provide 2 female XT-30s in the package. We also have adapters that go from popular connectors to XT-30 females. This unit also features servo matching on 2 channels, each with 2 servo outputs. Each of the 4 servos can individually be reversed and have their center and each endpoint adjusted. The new unit is also lower profile, improved servo connector retention and a fully enclosed design. It provides a power distribution unit for your smaller aircraft that is light weight and compact. The unit is designed for all receivers, end-loading or top-loading. The unit is designed to work with 2S LiFe or 2S Li-ion\/poly batteries and regulates the servo voltage to 6.0V. It a 5.0 volt regulator for the receiver that delivers filtered, clean power. The unit has LED indicators for servo and receiver power. All signals, in and out of the unit are buffered and have RF filtering. The unit also has a built-in Fiber-optic Transmitter for our Ignition Cutoff system. It can be ordered without a Fiber-optic receiver, an Unregulated Fiber-optic receiver or a Regulated Fiber-optic receiver.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003eRecommended for: 60cc and under 3D, 75cc and under IMAC \u0026amp; Scale \u003c\/li\u003e\n\u003cli\u003eLight weight and compact design: 2.9 oz (82g), 2.75” x 4.0”, \u003c\/li\u003e\n\u003cli\u003e6.0V Servo Voltage with 2S LiFe or 2S Li-ion\/poly Batteries \u003c\/li\u003e\n\u003cli\u003eBattery inputs protected against battery faults, lost cell or short \u003c\/li\u003e\n\u003cli\u003eHigh-current XT-30 battery connectors (15A sustained, 30A peak) \u003c\/li\u003e\n\u003cli\u003e2 Channels of Servo Matching with 2 Outputs Each \u003c\/li\u003e\n\u003cli\u003eFiltered and regulated 5.0V power to receiver \u003c\/li\u003e\n\u003cli\u003eReceivers can be end-loading or top-loading \u003c\/li\u003e\n\u003cli\u003eLED indicators for servo and receiver power \u003c\/li\u003e\n\u003cli\u003eFully buffered signal line for each servo \u003c\/li\u003e\n\u003cli\u003eFull RF filtering of all signals in and out of unit \u003c\/li\u003e\n\u003cli\u003eImpedance matching to reduce signal ringing on long servo leads \u003c\/li\u003e\n\u003cli\u003eIgnition Cutoff Fiber-Optic Transmitter\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Smart-Fly","offers":[{"title":"Default Title","offer_id":46726182535357,"sku":"SMT-PS-24-4","price":214.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/SMT-PS-24-4-smart-fly-power-system-sport-eq-equlaizer-plus.jpg?v=1777561246"},{"product_id":"powersystem-eq6-turbo-plus","title":"PowerSystem Eq6 Turbo Plus","description":"\u003ch2\u003ePowerSystem Eq6 Turbo Plus with Cutoff Receiver \u0026amp; Fiber-Optic Cable\u003c\/h2\u003e \u003cp\u003eThe PowerSystem Eq6 combines three Smart-Fly products into one compact, light system. The unit has eight channels, six of which have the Equalizer (servo matching) function built into them. The unit uses Deans Ultra Plug connectors for power and accepts power from two 2-cell Li-ion or Li-poly batteries. The unit has a built in BatShare to protect against one bad battery affecting the other battery. Power for the receiver is brought straight from the battery connector to a filter and regulator that supplies clean 5.0V power to the receiver. The servo regulator is adjustable from 5.5V to 6.5V and is connected by a large power bus to the servo output connectors resulting in no voltage drop due to wiring or connector resistance. The PowerSystem Eq6 comes in two flavors, standard and Turbo. The Turbo version is meant for 150cc and larger size planes and the regulator can supply 17.5 amps of continuous current with 35 amp peaks. The unit also includes our Ignition Cutoff as a built-in feature. This provides an optically isolated ignition kill function for gas engines with electronic ignition modules. We also sell the units without the Cutoff receiver module and fiber-optic cable for jet applications.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eFor 150cc and larger gas aircraft\u003c\/li\u003e \u003cli\u003eLight weight, 4.4oz, 128g and compact, 6.0” x 3.0” design\u003c\/li\u003e \u003cli\u003eFor Li-ion or Li-poly batteries\u003c\/li\u003e \u003cli\u003eBattery inputs protected against battery faults, lost cell or short\u003c\/li\u003e \u003cli\u003eAdjustable servo regulator, 5.5V-6.5V, 17.5amps continuous, 35 amps peak\u003c\/li\u003e \u003cli\u003e6 of the 8 channels have servo matching and reversing\u003c\/li\u003e \u003cli\u003eFiltered and regulated 5.0V power to receiver\u003c\/li\u003e \u003cli\u003eReceivers can be end-loading or top-loading\u003c\/li\u003e \u003cli\u003eFully buffered and RF filtered signal line for each servo\u003c\/li\u003e \u003cli\u003eLong servo lead line matching\u003c\/li\u003e \u003cli\u003eBuilt-in Ignition Cutoff\u003c\/li\u003e \u003cli\u003eMay not be compatible with some Multiplex radios\u003c\/li\u003e \u003c\/ul\u003e","brand":"Smart-Fly","offers":[{"title":"Default Title","offer_id":46726182633661,"sku":"SMT-PS-3TP","price":299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/SMT-PS-3TP-smart-fly-power-system-eq-plus.jpg?v=1777561247"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/collections\/PBS-4102-powerbox-pioneer-magnetic-switch.jpg?v=1779723669","url":"https:\/\/www.chiefrc.com\/collections\/power-systems.oembed","provider":"Chief RC Inc","version":"1.0","type":"link"}