{"title":"Switches","description":"","products":[{"product_id":"jeti-usa-power-main-switch-100a-with-magnetic-switch","title":"Jeti USA Power Main Switch 100A with Magnetic Switch","description":"\u003ch2\u003eJeti USA Power Main Switch 100A with Magnetic Switch\u003c\/h2\u003e\n\u003ch3\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/jeti-power-main-switch100-r3.pdf?v=1778185677\" target=\"_blank\" rel=\"noopener\"\u003eDownload the Instruction Manual Here\u003c\/a\u003e\u003c\/h3\u003e\n\u003cp\u003eMain Switch is an electronic primary switch designed for switching of the main power supply (Main Battery) for your RC model. It adds an element of safety when handling the model, without the need to physically disconnection of the main battery pack. The advantage of an electronic switch is that it offers a virtual unlimited On\/Off cycles, unlike mechanically operated switches. The Main Switch prevents the connectors from sparking when connecting the batteries, in fact it also replaces Anti-Spark connectors.\u003c\/p\u003e\n\u003cp\u003eThe Main Switch 100 and 200 are shipped with a magnetic or R3\/RSW receiver\/wireless switch. The Main Switch is primarily designed for switching the main battery of the RC model, but can also be used in applications where switching a DC power supply is needed.\u003c\/p\u003e\n\u003cp\u003eThe Main Switch comes equipped with complete Jeti telemetry. It measure Voltage, Current, Battery Capacity, and Temperature. Alarms can be set to monitor maximum current, minimum voltage, battery used capacity, and maximum temperature.\u003c\/p\u003e","brand":"Jeti","offers":[{"title":"Default Title","offer_id":46722680291517,"sku":"JETI-MSW100MA","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/JETI-MSW100MA-main-power-switch-magentic-key.jpg?v=1777484685"},{"product_id":"jeti-usa-power-main-switch-200a-with-magnetic-switch","title":"Jeti USA Power Main Switch 200A with Magnetic Switch","description":"\u003ch2\u003eJeti USA Power Main Switch 200A with Magnetic Switch\u003c\/h2\u003e\n\u003ch3\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/jeti-power-main-switch100-r3.pdf?v=1778185677\" target=\"_blank\" rel=\"noopener\"\u003eDownload the Instruction Manual Here\u003c\/a\u003e\u003c\/h3\u003e\n\u003cp\u003eMain Switch is an electronic primary switch designed for switching of the main power supply (Main Battery) for your RC model. It adds an element of safety when handling the model, without the need to physically disconnection of the main battery pack. The advantage of an electronic switch is that it offers a virtual unlimited On\/Off cycles, unlike mechanically operated switches. The Main Switch prevents the connectors from sparking when connecting the batteries, in fact it also replaces Anti-Spark connectors.\u003c\/p\u003e\n\u003cp\u003eThe Main Switch 100 and 200 are shipped with a magnetic or R3\/RSW receiver\/wireless switch. The Main Switch is primarily designed for switching the main battery of the RC model, but can also be used in applications where switching a DC power supply is needed.\u003c\/p\u003e\n\u003cp\u003eThe Main Switch comes equipped with complete Jeti telemetry. It measure Voltage, Current, Battery Capacity, and Temperature. Alarms can be set to monitor maximum current, minimum voltage, battery used capacity, and maximum temperature.\u003c\/p\u003e","brand":"Jeti","offers":[{"title":"Default Title","offer_id":46722680324285,"sku":"JETI-MSW200MA","price":255.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/JETI-MSW200MA-main-power-switch-magentic-key.jpg?v=1777484685"},{"product_id":"jeti-usa-universal-4-port-magnetic-switch","title":"Jeti USA Universal 4-Port Magnetic Switch","description":"\u003ch2\u003eJeti USA Universal 4-Port Magnetic Switch\u003c\/h2\u003e\n\u003ch3\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/jeti-mag-switch-univ4port.pdf?v=1778185675\" target=\"_blank\" rel=\"noopener\"\u003eDownload the Instruction Manual Here\u003c\/a\u003e\u003c\/h3\u003e\n\u003cp\u003eThe Universal Magnetic Switch from Jeti is a dual pole electronic switch with four outputs operated with the magnetic key (Sold Separately). The advantage of an electronic switch is that it offers a virtual unlimited ON\/OFF cycle, unlike mechanically operated switches.\u003c\/p\u003e\n\u003cp\u003eThe Universal Magnetic Switch is designed for 3.5V - 59V input and supports up to four (4) individual devices connected to the ports. Output ports are divided to Master and OPTO, both sets of ports are optically insulated from each other preventing RF interference. Each pair of the connectors has single standard and single inverted output, this setup enables you to connect and control simultaneously several Jeti devices.\u003c\/p\u003e\n\u003cp\u003eThe faceplate contains an integrated LED to indicate the ON\/OFF status of the switch. Should one the devices become disconnected from the switch, the device will stay ON and switch will remember its ON\/OFF state.\u003c\/p\u003e","brand":"Jeti","offers":[{"title":"Default Title","offer_id":46722681307325,"sku":"JETI-SWMSW","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/JETI-SWMSW-universal-4-port-magnetic-switch.jpg?v=1777484695"},{"product_id":"jeti-usa-universal-sw4-wireless-switch-expander","title":"Jeti USA Universal SW4 Wireless Switch Expander","description":"\u003ch2\u003eJeti USA Universal SW4 Wireless Switch Expander\u003c\/h2\u003e \u003ch3\u003e\u003ca href=\"https:\/\/chiefaircraft.com\/pub\/media\/descriptions\/pdf\/jeti-switch-univ4port-sw4.pdf\" target=\"_blank\" alt=\"Instruction Manual\"\u003eDownload the Instruction Manual Here\u003c\/a\u003e\u003c\/h3\u003e \u003cp\u003eThe Jeti Expander SW4 is an extension for Magnetic and RC Wireless switches and it’s designed for switching multiple devices simultaneously. The Jeti The Expander SW4 allows you to combine the switching duties so that several devices can be controlled using one only element. Furthermore, some outputs are optically isolated to prevent interference. This makes it is possible to isolate control of devices which may be sensitive to electric interference.\u003c\/p\u003e \u003cp\u003eNow you can simultaneously turn ON\/OFF your Central Box 200 and Power Main Switch or Ignition Electronic Switch SPS 20 and Receiver Voltage Regulator SBEC 40 using Jeti R3\/RSW Wireless RC Switch.\u003c\/p\u003e","brand":"Jeti","offers":[{"title":"Default Title","offer_id":46722681340093,"sku":"JETI-SWSW4","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/JETI-SWSW4-universal-wireless-switch-expander.jpg?v=1777484697"},{"product_id":"one-piece-charge-switch-with-jr-connector","title":"One Piece Charge Switch, with JR Connector","description":"\u003ch2\u003eOne Piece Charge Switch, with JR Connector, from Maxx Products\u003c\/h2\u003e\r\n\u003cp\u003eHeavy duty switch with integrated charge port and dust cover, compatible with radios with DSC functions. This switch also includes a piece of silicon rubber pad for vibration insulation. Mounting cut-off area for this switch is 1.1\" x 0.5\".\u003c\/p\u003e ","brand":"MPI","offers":[{"title":"Default Title","offer_id":46724568547517,"sku":"MPI-3470","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/MPI-3470-one-piece-charge-switch.jpg?v=1777502079"},{"product_id":"powerbox-sensorswitch-ng","title":"PowerBox SensorSwitch NG","description":"\u003ch2\u003ePowerBox SensorSwitch NG\u003c\/h2\u003e\r\n\u003cp\u003e\u003cb\u003eFits:\u003c\/b\u003e Royal SRS, Royal SR2, Champion SRS, Mercury SRS, Mercury SR2, Competition SR2, Source\u003c\/p\u003e","brand":"PowerBox Systems","offers":[{"title":"Default Title","offer_id":46724571103421,"sku":"PBS-3570","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/PBS-3570-sensorswitch.jpg?v=1777502116"},{"product_id":"powerbox-pioneer-12x-microswitch","title":"PowerBox Pioneer\/12x MicroSwitch","description":"\u003ch2\u003ePowerBox Pioneer\/12x MicroSwitch\u003c\/h2\u003e\r\n\u003cp\u003e\u003cb\u003eFits:\u003c\/b\u003e PowerBox Pioneer,  PBR-12X, PowerBox EVO\u003c\/p\u003e","brand":"PowerBox Systems","offers":[{"title":"Default Title","offer_id":46724571136189,"sku":"PBS-3584","price":37.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/PBS-3584-powerbox-microswitch-sensor-switch.jpg?v=1777502115"},{"product_id":"powerbox-magic-jeti-switch-red-connector","title":"PowerBox Magic Jeti Switch, Red Connector","description":"\u003ch2\u003ePowerBox Magic Jeti Switch, Red Connector\u003c\/h2\u003e \u003cp\u003eThe Magic Jeti Switch makes it possible to switch any PowerBox on and off from the transmitter. It forms the ideal complement to any PowerBox system which is installed in an inaccessible location, or in a model where an external switch is not desirable.\u003c\/p\u003e \u003cp\u003eThe Magic Jeti Switch is stuck to the Jeti RCSW and connected to it, producing a compact, wireless switching unit which takes the switching signal from the Jeti RC-Switch and “translates” it for the PowerBox. At the transmitter the switching process can be triggered using any switch, and confirmed on-screen with a button. This procedure eliminates the possibility of switching the model off accidentally. You can also set audible confirmation for the switching process by means of an audio file (download in our forum).\u003c\/p\u003e \u003cp\u003eThe combination of Jeti RCSW and Magic Jeti Switch draws a very low idle current (\u0026lt; 200 µA), but nevertheless we recommend that you disconnect the switch from the PowerBox if flying is unlikely for a protracted period, e.g. over the Winter.\u003c\/p\u003e \u003cp\u003eThe Magic Jeti Switch is available in two versions: one is fitted with a red plug, and is suitable for the BaseLog, Evolution, Competition and Cockpit; the other with a black plug, suitable for the Royal SRS and Champion SRS.\u003c\/p\u003e","brand":"PowerBox Systems","offers":[{"title":"Default Title","offer_id":46724572053693,"sku":"PBS-5610","price":23.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/PBS-5610-magic-jeti-switch.jpg?v=1777502115"},{"product_id":"powerbox-6v-7-8v-sensor-v3-with-jr-plugs","title":"PowerBox 6V \/ 7.8V Sensor V3, with JR Plugs","description":"\u003ch2\u003ePowerBox 6V \/ 7.8V Sensor V3, with JR Plugs\u003c\/h2\u003e \u003ch2\u003ePowerBox 5.9V Double-Regulated Sensor, with JR Plugs\u003c\/h2\u003e \u003cp\u003eThe PowerBox Sensor V3 is the third generation of the PowerBox Sensor, which is well-known throughout the world. For almost twenty years the PowerBox Sensor has represented the standard for small to medium-sized models thanks to its compact format and versatility.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003eUltra-light unit, compact format \u003c\/li\u003e\n\u003cli\u003eDouble regulated output voltage \u003c\/li\u003e\n\u003cli\u003eRedundant switch and regulator circuitry \u003c\/li\u003e\n\u003cli\u003eUser-selectable output voltage: 6.0 V or 7.8 V \u003c\/li\u003e\n\u003cli\u003eSeparate RGB LED voltage indicators for each battery \u003c\/li\u003e\n\u003cli\u003eTelemetry support for CORE systems \u003c\/li\u003e\n\u003cli\u003eSupports 4 different battery types: 2s LiPo, 2s LiIon, 2s LiFePo and 5s NiMH \u003c\/li\u003e\n\u003cli\u003eRegulator monitoring \u003c\/li\u003e\n\u003cli\u003eSuppression of servo feedback currents\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eBy using the latest components PowerBox has been able to reduce the size of the Sensor V3 significantly. For example, the case is now exactly half as deep (11 mm compared with 22 mm). Nevertheless, the Sensor V3 still fits neatly in the aperture used by its predecessor.\u003c\/p\u003e \u003cp\u003eThe introduction of a top-quality aluminum case, machined and anodized, has brought a substantial increase in the unit’s cooling efficiency, with the result that the maximum continuous current capacity of the PowerBox Sensor V3 is around 35 % higher. In fact, the peak load capacity is twice as high: the Sensor V3 can handle more than 20 A for several seconds!\u003c\/p\u003e \u003cp\u003eThe Sensor V3 offers two user-selectable output voltages: for normal servos it can be set to a regulated 6.0 V, while a regulated 7.8 V is available for HV servos– provided that the batteries supply the higher input voltage required.\u003c\/p\u003e \u003cp\u003ePower to the unit can be drawn from four different battery types: LiPo, LiIon, LiFePo, NiMH. Ultra-bright RGB LEDs are fitted to indicate battery voltage; they light up in various colors to display the charge status of the batteries.\u003c\/p\u003e \u003cp\u003eCORE users also benefit from one special additional feature: both battery voltages can be displayed directly on the transmitter by means of telemetry.\u003c\/p\u003e","brand":"PowerBox Systems","offers":[{"title":"Default Title","offer_id":46724572086461,"sku":"PBS-6330","price":128.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/PBS-6630-powerbox-sensor-v3-jr-jr-connectors.jpg?v=1777502117"},{"product_id":"powerbox-6v-7-8v-sensor-v3-with-multiplex-jr-plugs","title":"PowerBox 6V \/ 7.8V Sensor V3, with Multiplex \u0026 JR Plugs","description":"\u003ch2\u003ePowerBox 6V \/ 7.8V Sensor V3, with Multiplex \u0026amp; JR Plugs\u003c\/h2\u003e \u003ch2\u003ePowerBox 5.9V Double-Regulated Sensor, with Multiplex \u0026amp; JR Plugs\u003c\/h2\u003e \u003cp\u003eThe PowerBox Sensor V3 is the third generation of the PowerBox Sensor, which is well-known throughout the world. For almost twenty years the PowerBox Sensor has represented the standard for small to medium-sized models thanks to its compact format and versatility.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003eUltra-light unit, compact format \u003c\/li\u003e\n\u003cli\u003eDouble regulated output voltage \u003c\/li\u003e\n\u003cli\u003eRedundant switch and regulator circuitry \u003c\/li\u003e\n\u003cli\u003eUser-selectable output voltage: 6.0 V or 7.8 V \u003c\/li\u003e\n\u003cli\u003eSeparate RGB LED voltage indicators for each battery \u003c\/li\u003e\n\u003cli\u003eTelemetry support for CORE systems \u003c\/li\u003e\n\u003cli\u003eSupports 4 different battery types: 2s LiPo, 2s LiIon, 2s LiFePo and 5s NiMH \u003c\/li\u003e\n\u003cli\u003eRegulator monitoring \u003c\/li\u003e\n\u003cli\u003eSuppression of servo feedback currents\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eBy using the latest components PowerBox has been able to reduce the size of the Sensor V3 significantly. For example, the case is now exactly half as deep (11 mm compared with 22 mm). Nevertheless, the Sensor V3 still fits neatly in the aperture used by its predecessor.\u003c\/p\u003e \u003cp\u003eThe introduction of a top-quality aluminium case, machined and anodised, has brought a substantial increase in the unit’s cooling efficiency, with the result that the maximum continuous current capacity of the PowerBox Sensor V3 is around 35 % higher. In fact, the peak load capacity is twice as high: the Sensor V3 can handle more than 20 A for several seconds!\u003c\/p\u003e \u003cp\u003eThe Sensor V3 offers two user-selectable output voltages: for normal servos it can be set to a regulated 6.0 V, while a regulated 7.8 V is available for HV servos– provided that the batteries supply the higher input voltage required.\u003c\/p\u003e \u003cp\u003ePower to the unit can be drawn from four different battery types: LiPo, LiIon, LiFePo, NiMH. Ultra-bright RGB LEDs are fitted to indicate battery voltage; they light up in various colours to display the charge status of the batteries.\u003c\/p\u003e \u003cp\u003eCORE users also benefit from one special additional feature: both battery voltages can be displayed directly on the transmitter by means of telemetry.\u003c\/p\u003e","brand":"PowerBox Systems","offers":[{"title":"Default Title","offer_id":46724572119229,"sku":"PBS-6332","price":128.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/PBS-6332-powerbox-sensor-v3-mpx-jr-connectors.jpg?v=1777502117"},{"product_id":"powerbox-6v-7-8v-sensor-v3-with-deans-jr-plugs","title":"PowerBox 6V \/ 7.8V Sensor V3, with Deans \u0026 JR Plugs","description":"\u003ch2\u003ePowerBox 6V \/ 7.8V Sensor V3, with Deans \u0026amp; JR Plugs\u003c\/h2\u003e \u003ch2\u003ePowerBox 5.9V Double-Regulated Sensor, with Multiplex \u0026amp; JR Plugs\u003c\/h2\u003e \u003cp\u003eThe PowerBox Sensor V3 is the third generation of the PowerBox Sensor, which is well-known throughout the world. For almost twenty years the PowerBox Sensor has represented the standard for small to medium-sized models thanks to its compact format and versatility.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003eUltra-light unit, compact format \u003c\/li\u003e\n\u003cli\u003eDouble regulated output voltage \u003c\/li\u003e\n\u003cli\u003eRedundant switch and regulator circuitry \u003c\/li\u003e\n\u003cli\u003eUser-selectable output voltage: 6.0 V or 7.8 V \u003c\/li\u003e\n\u003cli\u003eSeparate RGB LED voltage indicators for each battery \u003c\/li\u003e\n\u003cli\u003eTelemetry support for CORE systems \u003c\/li\u003e\n\u003cli\u003eSupports 4 different battery types: 2s LiPo, 2s LiIon, 2s LiFePo and 5s NiMH \u003c\/li\u003e\n\u003cli\u003eRegulator monitoring \u003c\/li\u003e\n\u003cli\u003eSuppression of servo feedback currents\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eBy using the latest components PowerBox has been able to reduce the size of the Sensor V3 significantly. For example, the case is now exactly half as deep (11 mm compared with 22 mm). Nevertheless, the Sensor V3 still fits neatly in the aperture used by its predecessor.\u003c\/p\u003e \u003cp\u003eThe introduction of a top-quality aluminium case, machined and anodised, has brought a substantial increase in the unit’s cooling efficiency, with the result that the maximum continuous current capacity of the PowerBox Sensor V3 is around 35 % higher. In fact, the peak load capacity is twice as high: the Sensor V3 can handle more than 20 A for several seconds!\u003c\/p\u003e \u003cp\u003eThe Sensor V3 offers two user-selectable output voltages: for normal servos it can be set to a regulated 6.0 V, while a regulated 7.8 V is available for HV servos– provided that the batteries supply the higher input voltage required.\u003c\/p\u003e \u003cp\u003ePower to the unit can be drawn from four different battery types: LiPo, LiIon, LiFePo, NiMH. Ultra-bright RGB LEDs are fitted to indicate battery voltage; they light up in various colours to display the charge status of the batteries.\u003c\/p\u003e \u003cp\u003eCORE users also benefit from one special additional feature: both battery voltages can be displayed directly on the transmitter by means of telemetry.\u003c\/p\u003e","brand":"PowerBox Systems","offers":[{"title":"Default Title","offer_id":46724572184765,"sku":"PBS-6334","price":128.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/PBS-6334-powerbox-sensor-v3-deans-jr-connectors.jpg?v=1777502117"},{"product_id":"powerbox-magsensor-with-sensor-keychain","title":"PowerBox MagSensor, with Sensor \u0026 Keychain","description":"\u003ch2\u003ePowerBox MagSensor, with Sensor \u0026amp; Keychain\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/MagSensor-Manual.pdf?v=1778255480\" target=\"_blank\" rel=\"noopener\"\u003e\u003cstrong\u003eClick Here for the Instruction Manual\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe MagSensor represents an alternative method of operating and switching our PowerBox battery backers. The circuit is based on modern, zero-contact \"Hall sensors\", which respond to a magnetic field by activating the electronic switches in the PowerBox. The Hall sensors do not switch the current, but simply pass on the switching signal.\u003c\/p\u003e\n\u003cp\u003eThis accessory is suitable for all PowerBox systems, regardless of age, which are designed to be switched on and off using the SensorSwitch. The basic purpose of the MagSensor is to switch the dual power circuits on and off, but it can also be used to reset the capacity display fitted to more recent systems, if this is an integral feature of the PowerBox. The SensorSwitch must still be used for programming servos and carrying out set-up tasks within the PowerBox's programming menu. The particular advantage of the MagSensor is that scale pilots can exploit all the advantages of our redundant battery backer systems, but without an exposed On \/ Off switch.\u003c\/p\u003e\n\u003cp\u003eThe magnetic trigger is powerful enough to penetrate reliably through thick GRP \/ CFRP walls panels, even if they are several millimeters thick.\u003c\/p\u003e\n\u003cp\u003eIn addition to a pair of green LEDs for visual monitoring, the MagSensor features a supplementary Piezo sounder, which confirms the On \/ Off switching process by means of beeps of different pitch.\u003c\/p\u003e\n\u003cp\u003eThe MagSensor still requires you to activate both power circuits individually - as with all PowerBox systems. The reason behind this feature is that the PowerBox contains two redundant switching and regulatory systems. Separate control also gives you the opportunity to check each of the PowerBox's power circuits individually - and this also applies to the MagSensor.\u003c\/p\u003e\n\u003cp\u003eIf you are using a PowerBox System with an integral capacity counter, the MagSensor can also be used to reset the residual capacity display.\u003c\/p\u003e","brand":"PowerBox Systems","offers":[{"title":"Default Title","offer_id":46724573266109,"sku":"PBS-9040","price":43.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/PBS-9040-magsensor-v1.jpg?v=1777502117"},{"product_id":"pin-flag-failsafe-switch","title":"Pin \u0026 Flag Failsafe Switch","description":"\u003ch2\u003ePin \u0026amp; Flag Failsafe Switch, from Smart-Fly\u003c\/h2\u003e \u003ch3\u003eNot Recommended for PowerSafe Receivers\u003c\/h3\u003e \u003cp\u003eThe Pin \u0026amp; Flag Failsafe Switch is a remote failsafe switch that can only be used in conjunction with one of our other products, most regulators, PowerExpanders and PowerSystems. The unit is not a stand-alone unit that can be used as a general purpose switch. This product is not recommended for use with PowerSafe receivers as we do not test for compatibility.\u003c\/p\u003e","brand":"Smart-Fly","offers":[{"title":"Default Title","offer_id":46726179815613,"sku":"SMT-FS01","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/SMT-FS01-pin-flag-failsafe-switch.jpg?v=1777561237"},{"product_id":"pin-flag-failsafe-switch-charge-package","title":"Pin \u0026 Flag Failsafe Switch \u0026 Charge Package","description":"\u003ch2\u003ePin \u0026amp; Flag Failsafe Switch \u0026amp; Charge Package\u003c\/h2\u003e \u003cp\u003e\u003cstrong\u003eFor use with the Smart-Fly SuperReg and TurboReg.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eFailsafe operation with the remote on\/off switch. The switch actually turns the failsafe regulator on and off and does not carry the system load current. If the switch or wiring between the switch and failsafe regulator were to fail the regulator stays in the on state until you unplug it from the battery. Because there is a connector between the regulator and the on\/off switch, you can control multiple regulators with a single switch using a simple \"Y\" extension.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCaution:\u003c\/strong\u003e The Regulator with failsafe Switch presents a slight load to your battery even when off. This load is 0.4mAh or about 10mA out of your pack for each 24-hour period. You should disconnect the battery if you know the plane will be sitting for more than a couple days.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePin and Flag Failsafe Switch\u003c\/li\u003e \u003cli\u003eTwo Charge Jack Mounts\u003c\/li\u003e \u003cli\u003eTwo Charge Leads with Futaba and JR Male Ends\u003c\/li\u003e \u003c\/ul\u003e","brand":"Smart-Fly","offers":[{"title":"Default Title","offer_id":46726182076605,"sku":"SMT-PF-SWITCH","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/SMT-PF-SWITCH-pin-flag-failsafe-switch-charge-package.jpg?v=1777561242"},{"product_id":"heavy-duty-18-awg-superswitch","title":"Heavy Duty 18 AWG SuperSwitch","description":"\u003ch2\u003eHeavy Duty 18 AWG SuperSwitch, 2 pack\u003c\/h2\u003e \u003cp\u003e\u003cstrong\u003eProvides the same features at the SuperSwitch except for 18ga wire and a Deans Ultra Plug output to mate with the Power Expander.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe SuperSwitch is a DSC style switch designed for the demands of large scale aircraft. The Heavy-Duty switches with their 18 gauge wires are just not sufficient for 1\/3 scale aircraft up. Even with dual receivers in the 40% and larger planes the current draw from the battery through the switch can be substantial during maneuvers. We have measured a digital servo, unloaded, drawing 0.6 Amp when kept in continuous motion. Image what the same servo is drawing under load and then multiply that by the six to eleven servos you have in the plane. While this may be momentary this is when you need the least voltage drop to the servo as voltage supplies the servos’ torque. Reduce the voltage the servo sees and you reduce the torque the servo can supply.\u003c\/p\u003e \u003cp\u003eThe unique features of this switch is the 18 gauge wire on the battery side with high-quality Deans connectors and the dual leads on the receiver side. This wire and connector combination allows you to mount your battery anywhere you want and you don’t have to worry about voltage drops in long wire runs. This minimizes the voltage drop cause by wire resistance. At the high currents digital servos require from the battery this can actually be substantial. We have measured a half volt drop over eighteen inches of 22 gauge wire and one connector at 5.0 amps. On the receiver side, again one or both leads may be used but both leads is recommended so that your system see the full battery voltage.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eHeavy, 18 gauge wire in and out of the switch\u003c\/li\u003e \u003cli\u003eHeavy-duty Deans Ultraplug Connectors in and out\u003c\/li\u003e \u003cli\u003eCompatible with all radio systems\u003c\/li\u003e \u003cli\u003eCompatible with Smart-Fly Regulators, PowerExpanders and PowerSystems\u003c\/li\u003e \u003c\/ul\u003e","brand":"Smart-Fly","offers":[{"title":"Default Title","offer_id":46726183289021,"sku":"SMT-S-SWITCH-HD","price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/SMT-S-SWITCH-HD-smart-fly-heavy-duty-super-switch.jpg?v=1777561301"},{"product_id":"heavy-duty-18-awg-superswitch-2-pack","title":"Heavy Duty 18 AWG SuperSwitch, 2 pack","description":"\u003ch2\u003eHeavy Duty 18 AWG SuperSwitch\u003c\/h2\u003e \u003cp\u003e\u003cstrong\u003eProvides the same features at the SuperSwitch except for 18ga wire and a Deans Ultra Plug output to mate with the Power Expander.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe SuperSwitch is a DSC style switch designed for the demands of large scale aircraft. The Heavy-Duty switches with their 18 gauge wires are just not sufficient for 1\/3 scale aircraft up. Even with dual receivers in the 40% and larger planes the current draw from the battery through the switch can be substantial during maneuvers. We have measured a digital servo, unloaded, drawing 0.6 Amp when kept in continuous motion. Image what the same servo is drawing under load and then multiply that by the six to eleven servos you have in the plane. While this may be momentary this is when you need the least voltage drop to the servo as voltage supplies the servos’ torque. Reduce the voltage the servo sees and you reduce the torque the servo can supply. The unique features of this switch is the 18 gauge wire on the battery side with high-quality Deans connectors and the dual leads on the receiver side. This wire and connector combination allows you to mount your battery anywhere you want and you don’t have to worry about voltage drops in long wire runs. This minimizes the voltage drop cause by wire resistance. At the high currents digital servos require from the battery this can actually be substantial. We have measured a half volt drop over eighteen inches of 22 gauge wire and one connector at 5.0 amps. On the receiver side, again one or both leads may be used but both leads is recommended so that your system see the full battery voltage.\u003c\/p\u003e \u003cp\u003eThe leads provided will fit any radio system brand. The receiver leads are JR style which will fit both Futaba and JR receivers.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eHeavy, 18 gauge wire in and out of the switch\u003c\/li\u003e \u003cli\u003eHeavy-duty Deans Ultraplug Connectors in and out\u003c\/li\u003e \u003cli\u003eCompatible with all radio systems\u003c\/li\u003e \u003cli\u003eCompatible with Smart-Fly Regulators, PowerExpanders and PowerSystems\u003c\/li\u003e \u003c\/ul\u003e","brand":"Smart-Fly","offers":[{"title":"Default Title","offer_id":46726183420093,"sku":"SMT-SSW-HD-2PAK","price":64.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/SMT-SSW-HD-2PAK-smart-fly-heavy-duty-super-switch.jpg?v=1777561302"},{"product_id":"22-awg-superswitch-with-universal-charge-jack","title":"22 AWG SuperSwitch with Universal Charge Jack","description":"\u003ch2\u003e22 AWG SuperSwitch with Universal Charge Jack\u003c\/h2\u003e \u003cp\u003e\u003cstrong\u003eDSC switch with 18ga input, dual 22ga outputs \u0026amp; universal charge jack\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe SuperSwitch is a DSC style switch designed for the demands of large scale aircraft. The Standard switches with their 22 gauge wires are just not sufficient for 1\/3 scale aircraft up. Even with dual receivers in the 40% and larger planes the current draw from the battery through the switch can be substantial during maneuvers. We have measured a digital servo, unloaded, drawing 0.6 Amp when kept in continuous motion. Image what the same servo is drawing under load and then multiply that by the six to eleven servos you have in the plane. While this may be momentary this is when you need the least voltage drop to the servo as voltage supplies the servos’ torque. Reduce the voltage the servo sees and you reduce the torque the servo can supply.\u003c\/p\u003e \u003cp\u003eThe unique features of this switch is the 22 gauge wire on the battery side with high-quality Deans connectors and the dual leads on the receiver side. This wire and connector combination allows you to mount your battery anywhere you want and you don’t have to worry about voltage drops in long wire runs. This minimizes the voltage drop cause by wire resistance. At the high currents digital servos require from the battery this can actually be substantial. We have measured a half volt drop over eighteen inches of 22 gauge wire and one connector at 5.0 amps. On the receiver side, again one or both leads may be used but both leads is recommended so that your system see the full battery voltage.\u003c\/p\u003e \u003cp\u003eThe leads provided will fit any radio system brand. The receiver leads are JR style which will fit both Futaba and JR receivers.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e22 gauge wire to battery terminals\u003c\/li\u003e \u003cli\u003eDual output connectors to receiver for low voltage drop\u003c\/li\u003e \u003cli\u003eUniversal connectors\u003c\/li\u003e \u003cli\u003eCompatible with all radio systems\u003c\/li\u003e \u003cli\u003eCompatible with Smart-Fly Regulators\u003c\/li\u003e \u003c\/ul\u003e","brand":"Smart-Fly","offers":[{"title":"Default Title","offer_id":46726183551165,"sku":"SMT-SUP-SWITCH","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/SMT-SUP-SWITCH-smart-fly-super-switch-charge-jack.jpg?v=1777561298"},{"product_id":"ar9100-vr6010-soft-switch","title":"AR9100\/VR6010 Soft Switch","description":"\u003ch2\u003eSpektrum AR9100\/VR6010 Soft Switch\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFails on if the switch is damaged.\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for use with the Spektrum AR9100 and VR6010.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Spektrum","offers":[{"title":"Default Title","offer_id":46726185025725,"sku":"SPM-6820","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/SPM-6820-soft-switch-ar9100-vr6010.jpg?v=1777561301"},{"product_id":"powersafe-push-button-soft-switch-with-led","title":"PowerSafe Push Button Soft Switch with LED","description":"\u003ch2\u003eSpektrum PowerSafe Push Button Soft Switch with LED\u003c\/h2\u003e","brand":"Spektrum","offers":[{"title":"Default Title","offer_id":46726186107069,"sku":"SPM-9150","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/SPM-9150-powersafe-push-button-soft-switch.jpg?v=1777561299"},{"product_id":"3-wire-switch-harness","title":"3-Wire Switch Harness","description":"\u003ch2\u003eSpektrum 3-Wire Switch Harness\u003c\/h2\u003e","brand":"Spektrum","offers":[{"title":"Default Title","offer_id":46726186270909,"sku":"SPM-9530","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/SPM-9530-switch-harness-3-wire.jpg?v=1777561300"},{"product_id":"aircraft-rpm-sensor-and-bracket-for-ar7200bx","title":"Aircraft RPM Sensor and Bracket for AR7200BX","description":"\u003ch2\u003eSpektrum Aircraft RPM Sensor and Bracket for AR7200BX\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSensor for measuring motor\/engine RPM's in airplains and helicopters\u003c\/li\u003e\n\u003cli\u003eUsed in conjunction with the SPM9548 Telemetry Module, the Sensor Board and Sensor is used for measuring motor\/engine RPM's\u003c\/li\u003e\n\u003cli\u003ePlug and Play \u0026amp; includes 6\" telemetry interconnect lead and bracket for mounting the sensor\u003c\/li\u003e\n\u003cli\u003eDualLink provides superior frequency path diversity\u003c\/li\u003e\n\u003cli\u003eHigh Quality Plastic Case\u003c\/li\u003e\n\u003cli\u003eCompact footprint\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Spektrum","offers":[{"title":"Default Title","offer_id":46726186336445,"sku":"SPM-9560","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/SPM-9560-aircraft-rpm-sensor-and-bracket.jpg?v=1777561303"},{"product_id":"3-wire-ignition-rx-switch","title":"3-Wire Ignition RX Switch","description":"\u003ch2\u003eSpektrum 3-Wire Ignition RX Switch\u003c\/h2\u003e","brand":"Spektrum","offers":[{"title":"Default Title","offer_id":46726186762429,"sku":"SPM-A112","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/SPM-A112-ignition-rx-switch.jpg?v=1777561300"},{"product_id":"powerbox-digiswitch-v2-with-jr-jr-connectors","title":"PowerBox DigiSwitch V2 with JR\/JR Connectors","description":"\u003ch2\u003ePowerBox DigiSwitch V2\u003c\/h2\u003e \u003cul\u003e\n\u003cli\u003eHigh-performance electronic switch \u003c\/li\u003e\n\u003cli\u003eUltra-light unit, compact format \u003c\/li\u003e\n\u003cli\u003eRegulated output voltage \u003c\/li\u003e\n\u003cli\u003eRedundant switch and regulator circuitry \u003c\/li\u003e\n\u003cli\u003eUser-selectable output voltage: 6.0 V\/7.0 V\/7.6 V or non regulated \u003c\/li\u003e\n\u003cli\u003eSeparate RGB LED voltage indicators for each battery \u003c\/li\u003e\n\u003cli\u003eTelemetry support for CORE systems \u003c\/li\u003e\n\u003cli\u003eSupports 4 different battery types: 2s LiPo, 2s LiIon, 2s LiFePo and 5s NiMH \u003c\/li\u003e\n\u003cli\u003eRegulator monitoring \u003c\/li\u003e\n\u003cli\u003eSuppression of servo feedback currents\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eThe PowerBox DigiSwitch V2 is the second generation of the PowerBox Digi-Switch, which is well-known throughout the world. For almost fifteen years the PowerBox DigiSwitch has represented the standard for small to medium-sized models thanks to its compact format and versatility.\u003c\/p\u003e \u003cp\u003eBy using the latest components we have been able to reduce the size of the Digi-Switch V2 by about 20 %.\u003c\/p\u003e \u003cp\u003eThe introduction of a top-quality aluminium case, machined and anodised, has brought a substantial increase in the unit’s cooling efficiency, with the result that the maximum continuous current capacity of the PowerBox DigiSwitch V2 is around 20 % higher. In fact, the peak load capacity is twice as high: the DigiSwitch V2 can handle more than 10 A for several seconds!\u003c\/p\u003e \u003cp\u003eThe DigiSwitch V2 offers four user-selectable output voltages: for normal servos it can be set to a regulated 6.0 V, regulated voltages of 7.0 V and 7.6 V are available for HV servos, as is an option for non-regulated voltage.\u003c\/p\u003e \u003cp\u003ePower to the unit can be drawn from four different battery types: LiPo, LiIon, LiFePo, NiMH. Ultra-bright RGB LEDs are fitted to indicate battery voltage; they light up in various colours to display the charge status of the batteries.\u003c\/p\u003e \u003cp\u003eCORE users also benefit from one special additional feature: the battery voltage and regulator voltage can be displayed directly at the transmitter via telemetry!\u003c\/p\u003e","brand":"PowerBox Systems","offers":[{"title":"Default Title","offer_id":46780677390525,"sku":"PBS-6430","price":63.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/PBS-6430-digiswitch-v2-jr-jr-connectors_701bbd61-8676-4461-9d2e-8fcea6569c14.jpg?v=1778525561"},{"product_id":"powerbox-digiswitch-v2-with-mpx-jr-connectors","title":"PowerBox DigiSwitch V2 with MPX\/JR Connectors","description":"\u003ch2\u003ePowerBox DigiSwitch V2\u003c\/h2\u003e \u003cul\u003e\n\u003cli\u003eHigh-performance electronic switch \u003c\/li\u003e\n\u003cli\u003eUltra-light unit, compact format \u003c\/li\u003e\n\u003cli\u003eRegulated output voltage \u003c\/li\u003e\n\u003cli\u003eRedundant switch and regulator circuitry \u003c\/li\u003e\n\u003cli\u003eUser-selectable output voltage: 6.0 V\/7.0 V\/7.6 V or non regulated \u003c\/li\u003e\n\u003cli\u003eSeparate RGB LED voltage indicators for each battery \u003c\/li\u003e\n\u003cli\u003eTelemetry support for CORE systems \u003c\/li\u003e\n\u003cli\u003eSupports 4 different battery types: 2s LiPo, 2s LiIon, 2s LiFePo and 5s NiMH \u003c\/li\u003e\n\u003cli\u003eRegulator monitoring \u003c\/li\u003e\n\u003cli\u003eSuppression of servo feedback currents\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eThe PowerBox DigiSwitch V2 is the second generation of the PowerBox Digi-Switch, which is well-known throughout the world. For almost fifteen years the PowerBox DigiSwitch has represented the standard for small to medium-sized models thanks to its compact format and versatility.\u003c\/p\u003e \u003cp\u003eBy using the latest components we have been able to reduce the size of the Digi-Switch V2 by about 20 %.\u003c\/p\u003e \u003cp\u003eThe introduction of a top-quality aluminium case, machined and anodised, has brought a substantial increase in the unit’s cooling efficiency, with the result that the maximum continuous current capacity of the PowerBox DigiSwitch V2 is around 20 % higher. In fact, the peak load capacity is twice as high: the DigiSwitch V2 can handle more than 10 A for several seconds!\u003c\/p\u003e \u003cp\u003eThe DigiSwitch V2 offers four user-selectable output voltages: for normal servos it can be set to a regulated 6.0 V, regulated voltages of 7.0 V and 7.6 V are available for HV servos, as is an option for non-regulated voltage.\u003c\/p\u003e \u003cp\u003ePower to the unit can be drawn from four different battery types: LiPo, LiIon, LiFePo, NiMH. Ultra-bright RGB LEDs are fitted to indicate battery voltage; they light up in various colours to display the charge status of the batteries.\u003c\/p\u003e \u003cp\u003eCORE users also benefit from one special additional feature: the battery voltage and regulator voltage can be displayed directly at the transmitter via telemetry!\u003c\/p\u003e","brand":"PowerBox Systems","offers":[{"title":"Default Title","offer_id":46780677456061,"sku":"PBS-6432","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/files\/PBS-6432-digiswitch-v2-mpx-jr-connectors_b285fc53-c740-48d7-88d8-a3423fb24682.jpg?v=1778525561"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/4128\/0701\/collections\/SPM-9530-switch-harness-3-wire.jpg?v=1779723522","url":"https:\/\/www.chiefrc.com\/collections\/switches.oembed","provider":"Chief RC Inc","version":"1.0","type":"link"}