P350-Pro-S Turbine Engine Set with Kerosene Starter, 78.7 lbs Thrust, from JetCat
Click Here to Download Instruction Manual
Click Here for the PRO Turbine Engine Catalog & Details
The JetCat-P350-PRO-S type turbo-jet engine is designed as a propulsion unit for RC-aircraft and/or drones. The engine is lubricated by fuel with oil admixture. The engine is equipped with a BLDC starter), 1x BLDC fuel pump, 2x fuel solenoids and electronic control system (FADEC type). The engine may be modified based on customer specific requirements and to meet different operating / installation conditions.
- ECU (electronic control unit), fully programmable via detachable Ground Support Unit (GSU)
- Brushless starter and seal free brushless fuel pump
- Fuel & Kerosene-start solenoids
- Post Fuel filter downstream of the pump (last barrier filter)
- Barometric altitude / pressure sensor allowing for automatic engine tuning upon operation altitude.
- 4-pin Molex expansion connector (e.g. for smoke pumps/ fuel transfer pumps/GSU)
- Optional bleed-air port (e.g. for pressurization of fuel system)
- Direct quick start on kerosene via integrated high speed / low current ignition system
- High altitude, high flight speed in-air restart capability
- Automatic engine cool down cycle after shutting down.
- Reporting of fuel consumed / fuel flow rate / fuel burned / remaining fuel in tank
- Engine/ECU power On/Off via voltage control signal No external power switches required
- Engine safety shut down input, for instant engine shut down via (flight) termination system. This will kill power to fuel pump and shut off safety solenoid valves and stop engine in any case on a multiple redundant way, whilst ECU can stay powered on (for continued data reporting and or engine cool down).
- Monitoring and reporting of all currents / voltages (e.g. supply voltage / current, pump driving voltage) as well as all engine life parameters / setpoints.
- Automatic fuel purge feature for automatic filling/purge of fuel feed lines. As soon as fuel arrives at the engine, purging will automatically terminate.
- High performance ceramic bearings
The JetCat P350-PRO-S is a single-shaft engine comprising a single-stage radial compressor, annular combustion chamber, single stage axial turbine and fixed exhaust nozzle. At the compressor intake, there is a brushless starter system mounted. Intake air is compressed in the radial compressor stage, proceeds through the radial and axial diffuser into the combustion chamber where it is mixed with vaporized fuel. Combustion gases generated by fuel burning in the combustion chamber expand through the single state axial turbine and the exhaust nozzle to the atmosphere. The gas exiting the exhaust cone produces the required thrust. The rotor of the engine is mounted on 2 ball bearings lubricated by a fuel/oil mix.
The JetCat-PRO engine series provides the highest level of integration and maximum ease of installation. All peripheral systems necessary for the engines operation are fully integrated below the engines front cowling.
JetCat P350-PRO-S RC-Set including:
- 1x JetCat P350-PRO-S / 71153-0300
- 1x Turbine Mounting Clamp / 41143-0349
- 1x JetCat PRO-Interface V2 / 61168-0020
- 1x JetNet / 61129-0070
- 1x Remote Controller GSU V2.0 / 61101-0010
- Pressure ratio: 3.8
- Mass flow (kg/s): 0.65
- Consumption Full load (ml/min): 1185
- Consumption idle (ml/min): 148
- Weight [g]: 2890
- Dimensions of the diameter (mm): 136
- Length (mm): 350
- Exhaust gas temperature (°C): 480-750
- Idle speed (1/min): 30000
- Max rpm (1/min): 105000
- Thrust at idle (N): 15.5
- Thrust @ maxRpm (N): 360
- Thrust @ maxRpm (lb): 78.7
- Exhaust gas velocity (km/h): 2000
- Exhaust gas power output (kW): 100
- SFC @ maxRpm (kg/Nh): 0.158
Free Shipping on most radio control orders over $150 - Another way Chief RC Inc. saves you more money! Free Ground Shipping on orders over $150 within the 48 contiguous states. Oversized packages (16"h x 16"l or larger and 25 lbs or more) and hazardous materials are excluded (these packages will be shipped at published rate with no additional markup). Our FREE Shipping includes insurance up to $1,000 and email tracking. If you have any questions whether your order qualifies for the FREE Ground shipping policy, please contact one of our sales representatives toll free!
Shipping & Freight Quotes: Chief RC Inc can quote the freight and shipping charges prior to your order. Please include your full shipping address when requesting a quote. For International quotes, please include any of the applicable information; country, region, province, state, city and postal code.
Chief RC Inc has a 30-day return policy, which means you have 30 days after receiving your item to request a return. To be eligible for a return and full refund, your item must be in the same condition that you received it, without damage and unused, with tags, and in its original undamaged packaging. To request a refund please please contact us at info@chiefrc.com.