80-Amp E-flite Pro Brushless ESC with Switch-Mode BEC
- Up to 80 amps continuous current with proper air flow and 100 amps burst current (15 seconds)
- 5V switch-mode BEC capable of 5 amps continuous current with 6 amps max burst on any recommended input voltage
- Drive up to 7 analog or 6 digital standard-size servos with the BEC on any recommended input voltage
- 3- to 6-cell Li-Po, 9- to 18-cell Ni-MH/Ni-Cd input voltage
- Programmable motor braking
- Safe power-arm mode prevents accidental starts
- Programmable low voltage cutoff with settings for 3-cell Li-Po (9.2V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V) or 74% of battery starting voltage
- Programmable throttle input range (1.1ms–1.9ms or 1.2ms–1.8ms)
- Programmable soft start-up rate - .25 second or 1 second
- Auto motor shut down if signal is lost or there is interference
- Programmable timing—5 user-selectable ranges–use with a large variety of brushless motors
- Two operating modes–Airplane or Heli
- Pre-wired connectors—E-flite EC5 on battery input and 4.0mm female gold bullets on motor output leads
When performance matters in your high-current applications, look no further than the E-flite® 80-amp Pro switch-mode ESC. This is a high-quality, efficient sensorless brushless electronic speed control with an integrated switch-mode BEC. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication. It is capable of up to 80 amps continuous current when using 3- to 6-series Li-Po battery packs. You can drive up to 7 analog or 6 digital standard-size servos with the BEC on any recommended input voltage. Featuring an exposed, finned heat sink aluminum case with lightweight plastic end-caps, safe power-arming along with advanced programmable features such as low voltage cutoff, braking, timing, throttle input range and more, the E-flite 80-amp Pro switch-mode ESC is truly a ‘pro series’ electronic speed control.
Specifications:
- Amperage: 60 & Up
- Auto Cutoff: Yes
- BEC Continuous Current: 5A
- BEC Voltage: 5.5V Switch-mode
- Brake: Yes
- Cells w/BEC: 9-18 cells NiMH, 3-6S LiPo
- Continuous Maximum Current: 75 - 100A
- Forward: Yes
- Height: 0.62 in (15.5mm)
- Input Connector Types: EC5, 10AWG leads
- Length: 3.0 in (77mm)
- Momentary Peak Current: 100A (15 seconds) Proper Cooling Required
- Output Connector Types: 4mm Gold Bullet, 12AWG leads
- Overload Protection: Yes
- Time Delay Brake: Yes
- Type: Brushless
- Weight: 3.75 oz (106 g)
- Width: 1.6 in (41mm)
- Amperage: 60 & Up
- Auto Cutoff: Yes
- BEC Continous Current: 5A
- BEC Voltage: 5.5V Switch-mode
- Brake: Yes
- Cells w/BEC: 9-18 cells NiMH, 3-6S LiPo
- Continuous Maximum Current: 75 - 100A
- Forward: Yes
- Height: 0.62 in (15.5mm)
- Input Connector Types: EC5, 10AWG leads
- Length: 3.0 in (77mm)
- Momentary Peak Current: 100A (15 seconds) Proper Cooling Required
- Output Connector Types: 4mm Gold Bullet, 12AWG leads
- Overload Protection: Yes
- Time Delay Brake: Yes
- Type: Brushless
- Weight: 3.75 oz (106 g)
- Width: 1.6 in (41mm)
Free Shipping on most radio control orders over $150 - Another way Chief RC Inc. saves you more money! Free Ground Shipping on orders over $150 within the 48 contiguous states. Oversized packages (16"h x 16"l or larger and 25 lbs or more) and hazardous materials are excluded (these packages will be shipped at published rate with no additional markup). Our FREE Shipping includes insurance up to $1,000 and email tracking. If you have any questions whether your order qualifies for the FREE Ground shipping policy, please contact one of our sales representatives toll free!
Shipping & Freight Quotes: Chief RC Inc can quote the freight and shipping charges prior to your order. Please include your full shipping address when requesting a quote. For International quotes, please include any of the applicable information; country, region, province, state, city and postal code.
Chief RC Inc has a 30-day return policy, which means you have 30 days after receiving your item to request a return. To be eligible for a return and full refund, your item must be in the same condition that you received it, without damage and unused, with tags, and in its original undamaged packaging. To request a refund please please contact us at info@chiefrc.com.